Share Deals on Guns Ammo Accessories Here

[GOYABEAN]

A little while back someone was looking for SKS stripper clips !

SKS 10rd Stripper Clips for 7.62x39, 20 Pack, Steel, New $12.95

https://www.jgsales.com/sks-10rd-str...ew.-p-399.html

[GOYABEAN]

😎 SHK 30rd Steel AR15 Magazines $6.99

https://globalordnance.com/shk-30rd-...eid=39416b6153

SHK 30rd AK47 Magazines $7.99

https://globalordnance.com/shk-30rd-...eid=39416b6153

SHK 33rd Glock 9mm Magazine $9.99

https://globalordnance.com/amazing-s...eid=39416b6153

SHK .45 ACP 8 Round Magazine $6.99

https://globalordnance.com/shk-45-ac...eid=39416b6153

[Hodgie]

PSA has a good amount of their GF3 AK's in stock from $679 and up depending on furniture options.

Sadly no AK103 clones or AK74's.

https://palmettostatearmory.com/cata...ult/?q=PSAk+47

[Rural Ruger]

😎 SHK 30rd Steel AR15 Magazines $6.99

https://globalordnance.com/shk-30rd-...eid=39416b6153

These should be ok quality too, per past discussions on here. I havent put mine through their paces really, but so far so good. Finish and function good for a budget option

[Emptymag]

For anyone on a budget who needs a way to mount "whatever" to a handguard,
KM Tactical has ABSURDLY CHEAP rail sections.

I ended up ordering two M-Lok rails, two Keymod rails, and two 45 degree offset rail mounts.
They are SO cheap that even my broke ass can afford them!

$4.99 for the 45 degree mount
$1.50 for the slanted M-Lok mini-rail
.99 CENTS for the Keymod mini-rail!!!

They were ordered on the 4th and today is the 18th, so it took a while to get them, but my initial impression of each of them is favorable.
I had very low expectations at these prices, but I am happy and would have been happy if the 99 cent part cost $5.
The machining looks good and the edges/corners are not sharp - nor are they "rough" or "rounded" - they look and feel good.

I couldn't easily slide on a weapon light onto the M-Lok rail, but it slid right onto the Keymod rail. (the Keymod has "ACME" on the underside)
Any type of mount that "clamps" on by loosening a screw for the "tab" on one side to open up, allowing you to place the item directly down on the slot you want works just fine.
I wouldn't trust a 99 cent rail section for mounting a sling attachment, grip, or anything "load bearing" but for a weapon light, or similar, it should be just fine.

All in all, a OUTSTANDING value and a hell of a deal. (shipping is flat rate $5 sitewide - no minimum)
Note: they look a LOT better in person than the images on the website

I'll add the links after this post so that people don't end up quoting a massive post...

[Emptymag]

5 Slot M-LOK Mini Rail (Slanted)

• This M-LOK Accessory Rail is 3 inch length and provides a 5 slot section of mil-spec-M1913 Picatinny rail
  for the addition of tactical accessories.
• This rail section is compatible with any handguard that has an M-LOK interface.
• Aluminum construction
• 3 inch length
• 5 Slot accessory rail

$1.50 shipping is $5 flat rate sitewide - no minimum order
https://kmtactical.net/product/5-slot-m-lok-mini-rail/

[Emptymag]

5 Slot Keymod Mini Rail (Slanted)

• This Keymod Accessory Rail is 3 inch length and provides a 5 slot section of mil-spec-M1913 Picatinny rail
  for the addition of tactical accessories.
• This rail section is compatible with any handguard that has an Keynod interface.
• Aluminum construction
• 3 inch length
• 5 Slot accessory rail

.99 cents shipping is $5 flat rate sitewide - no minimum order
https://kmtactical.net/product/5-slo...il-slant-nose/

[Emptymag]

45 degree offset picatinny 4 slot rail mount

• Plate locking pin for secure fit
• Perfect for smaller accessories which don’t need to be on the top rail
• Also good for offsetting back up iron sights
• Matte Black anodized Aircraft grade aluminum
• Length 1.77”
• Width 1.69”
• Height 0.43”
• Weight 1.2oz

$4.99 shipping is $5 flat rate sitewide - no minimum order
SORRY! Sold out - sign up for notification - they seem to restock often
https://kmtactical.net/product/45-de...ot-rail-mount/

[Emptymag]

A little while back someone was looking for SKS stripper clips !

SKS 10rd Stripper Clips for 7.62x39, 20 Pack, Steel, New $12.95

https://www.jgsales.com/sks-10rd-str...ew.-p-399.html

Just happened upon these while viewing emails...

better price (not factoring in shipping - do yo own maff)
20 for $8.95
https://www.robertrtg.com/store/pc/2...ESE-4p6577.htm

[GOYABEAN]

Just happened upon these while viewing emails...

better price (not factoring in shipping - do yo own maff)
20 for $8.95
https://www.robertrtg.com/store/pc/2...ESE-4p6577.htm

That China shipment finally cleared customs you couldn't fine them anywhere for a time .