Results 1 to 5 of 5
Thread: 50 BMG coating issue?
-
November 13th, 2012, 07:11 AM #1
50 BMG coating issue?
I believe these are headed to the scrap pile, coating coming off, With pressures at BMG levels, if you used these, they would jam in barrel and blow like a whale?
Last edited by justsayno; January 4th, 2013 at 07:22 AM.
I talk jibberoush. pay attention.
-
November 13th, 2012, 10:21 AM #2
Re: 50 BMG coating issue?
Use them. I used stuff that looks a lot worse than that, never had a problem. At 2.00 each, ya better use'em
-
November 13th, 2012, 11:07 AM #3
Re: 50 BMG coating issue?
I can assure you that the condition those are in that it will not cause it to lodge in the barrel.
You can put the bullets in a tumbler to clean off the coating if it bothers you.
We have some World War I .303Brit on the farm where the bullets and the brass has a fine green patina on them. They are just as accurate as the normal looking stuff.RIP: SFN, 1861, twoeggsup, Lambo, jamesjo, JayBell, 32 Magnum, Pro2A, mrwildroot, dregan, Frenchy, Fragger, ungawa, Mtn Jack, Grapeshot, R.W.J., PennsyPlinker, Statkowski, Deanimator, roland, aubie515
Don't end up in my signature!
-
November 13th, 2012, 01:05 PM #4
Re: 50 BMG coating issue?
What you are probably seeing is galvanic corrosion between the alum tip and copper jackets.
The Hornday 50bmg Amax is lead core, alum tip, with copper jacket.
There is no way the coating is wearing off.
if you are going to scrap them, let me know and i'll pay the shipping.HGW, llc ~ Title 1 & NFA sales/manufacturing ~ Transfers - Title 1 $20 - NFA $50
-
November 14th, 2012, 06:25 AM #5
Re: 50 BMG coating issue?
Thanks for the info, cleaned one right up with backside of sandpaper. GB listed. NR.
I talk jibberoush. pay attention.
Similar Threads
-
870 mag extension (interior) coating
By rayh059 in forum GunsmithingReplies: 5Last Post: May 5th, 2011, 05:57 PM -
Coating a rifle in Pittsburgh
By makabi24 in forum GunsmithingReplies: 0Last Post: September 10th, 2010, 10:35 PM -
powder coating oven.
By o1dakota440 in forum GeneralReplies: 8Last Post: July 15th, 2009, 12:25 AM -
Removing a parkerized coating.
By P-11 shooter in forum GeneralReplies: 14Last Post: September 13th, 2008, 03:06 AM -
Teflon coating?
By rspowers in forum GeneralReplies: 3Last Post: October 1st, 2007, 09:48 PM
Bookmarks