Results 1 to 10 of 12
Thread: Area gunsmiths?
Hybrid View
-
January 13th, 2012, 06:41 PM #1
Area gunsmiths?
I want to get a set of Trijicon night sights installed on my M&P 9 and I am looking for a local gunsmith that can do the work for a reasonable price. The person who FFL'ed me the pistol and a member here recommended that I send the pistol out to have the work done. If I can find someone who does good work, at an affordable price in my area I would prefer to go this route. I never had any gunsmithing work done before so I need some suggestions including phone numbers if possible. Thanks.
Sanity, yours if you can keep it.....
-
January 14th, 2012, 11:17 AM #2
Re: Area gunsmiths?
So we have no decent gunsmiths within a reasonable distance of Hawley?
Sanity, yours if you can keep it.....
-
January 15th, 2012, 12:11 PM #3Grand Member
- Join Date
- Oct 2009
- Location
-
Chalfont,
Pennsylvania
(Bucks County) - Posts
- 2,421
- Rep Power
- 21474853
Re: Area gunsmiths?
I am about 1.5 hrs from there-
Or you can mail me the slide and the sights.
If you drive it down here, I do the install before your very eyes. You may check fire it in the the shop @20' to see if the zero suits you.
The cost is $10.00Crusader's local #556 South Central Asia chapter
-
January 15th, 2012, 01:12 PM #4Junior Member
- Join Date
- May 2011
- Location
-
Bucks County,
Pennsylvania
(Bucks County) - Posts
- 13
- Rep Power
- 0
Re: Area gunsmiths?
To the OP,
Definitely worth the drive down to CDI.
Good dude all the way around.
-
January 15th, 2012, 06:38 PM #5
Re: Area gunsmiths?
Thanks gentlemen, a few options have been presented to me since I made this post. The Pickerel Inn offered to do the job but they want the pistol for a week and $20-$25, they are probably sending it out to a gunsmith. However they live about 10 minutes away from me. Another member recommended a gunsmith out by Milford which isn't too far but I have to contact him and see how long/expensive the job is. What's the address of CDI? I'd like to look it up on Map-Quest if you wouldn't mind. I get a feeling it might not be too far from where I work and your business might be a viable alternative if these other two options don't pan out.
BTW, I ordered the Trijicon night sights from Amazon and I should have them by next Friday or Saturday.Sanity, yours if you can keep it.....
-
January 15th, 2012, 08:34 PM #6
Re: Area gunsmiths?
I took my glock to the handgunner in topton with the sights it took him less then 10 minutes and charged me 5 bucks.
Similar Threads
-
Lancaster Area Gunsmiths
By jkoons in forum GunsmithingReplies: 0Last Post: October 8th, 2011, 10:42 PM -
Any Ghost Rocket certified Gunsmiths in the SW area?
By lfibodyguard in forum GunsmithingReplies: 4Last Post: July 12th, 2011, 08:41 AM -
Gunsmiths in West Chester area?
By jjginpa in forum GunsmithsReplies: 0Last Post: March 10th, 2010, 08:48 PM -
Gunsmiths in the Schuylkill Country area
By Farbmeister in forum GeneralReplies: 6Last Post: February 23rd, 2009, 04:30 PM -
Any AR-15 Gunsmiths around Schuylkill County area??
By Konsukah_19 in forum GeneralReplies: 4Last Post: February 1st, 2008, 03:21 PM
Bookmarks