Results 1 to 9 of 9
Thread: Rem 700 SPS Varmint in .223
-
January 3rd, 2011, 08:50 PM #1Junior Member
- Join Date
- Jan 2011
- Location
-
Marysville,
Pennsylvania
(Perry County) - Posts
- 15
- Rep Power
- 0
Rem 700 SPS Varmint in .223
Bought this last Feburary (2010) and waited almost an enitre year to shoot it, been busy. Best so far was a 3 round/.50" group at 100 yards (factory ammo). Looking to have it glass bedded and work up my own loads.
-
January 4th, 2011, 05:39 PM #2Junior Member
- Join Date
- Aug 2010
- Location
-
Reading,
Pennsylvania
- Posts
- 22
- Rep Power
- 0
Re: Rem 700 SPS Varmint in .223
i have a sps .223 tac. that i handload with 26 grns. of h335 and rem 71/2b.r. primers and 52 grn. berger bullets .it will shoot under 3/8 of an inch 5 shots at a 100yds.
-
January 4th, 2011, 10:28 PM #3Junior Member
- Join Date
- Jan 2011
- Location
-
Marysville,
Pennsylvania
(Perry County) - Posts
- 15
- Rep Power
- 0
Re: Rem 700 SPS Varmint in .223
Thanks for the info it will come in handy. Do you know where can I find more load info for this gun?
-
January 5th, 2011, 08:08 AM #4
Re: Rem 700 SPS Varmint in .223
thats a nice rifle. left handed too!
ZRT-SECTOR 7
-
January 5th, 2011, 03:53 PM #5Junior Member
- Join Date
- Aug 2010
- Location
-
Reading,
Pennsylvania
- Posts
- 22
- Rep Power
- 0
Re: Rem 700 SPS Varmint in .223
you can buy a nice hodgen reloading annual in any store that sells magazines ,it cost about $8.99 .
jerry
-
January 6th, 2011, 05:18 PM #6Junior Member
- Join Date
- Aug 2010
- Location
-
Reading,
Pennsylvania
- Posts
- 22
- Rep Power
- 0
Re: Rem 700 SPS Varmint in .223
here are some tgts. from my 700 rem.sps .223 cal.
-
January 9th, 2011, 07:21 PM #7
-
January 9th, 2011, 09:14 PM #8Member
- Join Date
- Dec 2007
- Location
-
Laureldale,
Pennsylvania
(Berks County) - Posts
- 96
- Rep Power
- 39
Re: Rem 700 SPS Varmint in .223
Huh. Looks like someone put the bolt in the wrong way. I have a gunsmith that can fix that for you.
The truth may be out there but the lies are inside your head -Terry Pratchett
-
January 11th, 2011, 09:11 PM #9Junior Member
- Join Date
- Jan 2011
- Location
-
Marysville,
Pennsylvania
(Perry County) - Posts
- 15
- Rep Power
- 0
Re: Rem 700 SPS Varmint in .223
zzeiber, it's a left handed rifle and what you are seeing is a shadow at the bolt.
KDE870, the scope wasn't expensive at all and I basically purchased as a temp until I find a more suitable one. It's a BSA Illuminated Mil Dot - 6x24. I was trying to decide on two different scopes and couldn't but I wanted to shoot the rifle in the worse way so I bought a cheap scope so I guess I won't be expecting great things with it either.
Similar Threads
-
just got a new varmint gun
By CTD03 in forum GeneralReplies: 1Last Post: January 18th, 2010, 08:42 PM -
cz 204 527 varmint fs/ft
By g-lock-34 in forum GeneralReplies: 3Last Post: September 20th, 2009, 10:59 AM -
Rem 700 SPS Varmint
By clarion44 in forum GeneralReplies: 1Last Post: July 25th, 2009, 09:04 AM -
Remington 700 SPS Varmint
By Cooky86 in forum GeneralReplies: 0Last Post: May 9th, 2009, 04:10 PM -
Which rings for a RRA Varmint EOP?
By LordJim in forum GeneralReplies: 3Last Post: August 12th, 2008, 12:20 AM
Bookmarks