Results 1 to 6 of 6
Thread: AR 15 Barrel Extension Ware?
-
December 20th, 2010, 08:44 PM #1Junior Member
- Join Date
- Dec 2010
- Location
-
Richmond,
Virginia
- Posts
- 5
- Rep Power
- 0
AR 15 Barrel Extension Ware?
Just wanted to know if the ware I am seeing on my barrel extension is normal? I bought the gun new and have only put 300 rounds through it. Any input would be great.
-
December 20th, 2010, 08:56 PM #2
Re: AR 15 Barrel Extension Ware?
That's just the phosphate coating wearing off. Quite normal.
I don't speak English , I talk American!
-
December 20th, 2010, 09:28 PM #3Junior Member
- Join Date
- Dec 2010
- Location
-
Richmond,
Virginia
- Posts
- 5
- Rep Power
- 0
Re: AR 15 Barrel Extension Ware?
Well my gun has a chrome lined chamber. Isn't that area part of the camber?
-
December 20th, 2010, 09:46 PM #4
Re: AR 15 Barrel Extension Ware?
No , that's the barrel extension. A separate part. Barrels screws into it from the front , bolt locks into it from the rear.
I don't speak English , I talk American!
-
December 20th, 2010, 09:52 PM #5Junior Member
- Join Date
- Dec 2010
- Location
-
Richmond,
Virginia
- Posts
- 5
- Rep Power
- 0
Re: AR 15 Barrel Extension Ware?
ok thanks guess i just got a little confused, but as long as the wear is normal then i'm good to go.
-
December 20th, 2010, 10:26 PM #6
Re: AR 15 Barrel Extension Ware?
Don't be shocked when it gets a bit shiner with a few hundred more rounds.
I don't speak English , I talk American!
Similar Threads
-
M4 Feed Ramps/Barrel Extension
By Sooper Jenius in forum GeneralReplies: 3Last Post: September 19th, 2009, 03:37 AM -
XDM magazine extension
By Solo in forum GeneralReplies: 0Last Post: July 14th, 2009, 07:49 PM -
WTB: 870 +2 extension
By Never_Enough in forum GeneralReplies: 0Last Post: June 17th, 2009, 05:30 PM -
Grip Extension
By jdpate in forum GeneralReplies: 8Last Post: May 4th, 2008, 12:00 AM -
Pearce mag extension
By Severe in forum GeneralReplies: 1Last Post: November 2nd, 2006, 06:53 PM
Bookmarks