Results 1 to 6 of 6
-
November 25th, 2010, 07:51 PM #1Senior Member
- Join Date
- Aug 2010
- Location
-
Pittsburgh,
Pennsylvania
(Allegheny County) - Age
- 35
- Posts
- 328
- Rep Power
- 92705
Looking to upgrade my Ruger MkII with some Volquartsen parts, need some advice
I'm going to invest a little bit of money into upgrading my Mark II with some Volquartsen parts. I already installed their Exact Edge extractor to clear up the stovepipes that occured when I first picked up the gun.
I've already decided that the Volquartsen target trigger and target sear are a must from all the reviews i've read. I think i'm going to forgo the target hammer.
There are also a couple upgrades i'm considering, but i've found few testimonials regarding the function of these parts.
Titanium Disconnector
Volquartsen Hammer Bushing
Surestrike Firing Pin
Anyone have these parts installed? Are they worth it?
-
November 25th, 2010, 08:16 PM #2
Re: Looking to upgrade my Ruger MkII with some Volquartsen parts, need some advice
I installed the target trigger, hammer and sear years ago and so did my son. Well worth the effort.
Made a huge difference.
-
November 25th, 2010, 10:08 PM #3Active Member
- Join Date
- Apr 2008
- Location
-
New Oxford,
Pennsylvania
(Adams County) - Posts
- 153
- Rep Power
- 6907916
Re: Looking to upgrade my Ruger MkII with some Volquartsen parts, need some advice
Changing the sear has the greatest pay back. This takes the trigger pull from about 4 # down to 2-1/2#. Next is the trigger with travel adjustments. The target hammer has the least effect and may cause light strikes with some brands of ammo.
Some also replace the 1/8" pins with dowel pins which are 0.126", just large enough to take some of the play out of the action.
I have the Mark II slabside with trigger, sear, extractor, hammer bushings, and extended mag. release. The bushings take some of the slop out of the linkage, but it's a small change.
http://www.rimfiresports.com/merchan...egory_Code=VC2
-
November 26th, 2010, 10:20 PM #4
Re: Looking to upgrade my Ruger MkII with some Volquartsen parts, need some advice
You already have a Mark II so the hammer bushing isn't going to do as much for you as it would for somebody with a Mark III. With a Mark III user, it removes the magazine disconnect (making the take down and reassembly procedure much easier).
The target sear is by far the best upgrade I have done. However, I should have put the extended slide release in when I did it as well.
http://www.guntalk-online.com/detailstrip.htm Use this site and let us know what you decide and how you make out in the end.
-Zach
-
November 27th, 2010, 12:04 AM #5Senior Member
- Join Date
- Aug 2010
- Location
-
Pittsburgh,
Pennsylvania
(Allegheny County) - Age
- 35
- Posts
- 328
- Rep Power
- 92705
Re: Looking to upgrade my Ruger MkII with some Volquartsen parts, need some advice
Thank you for the link!!! That will make stripping the frame much easier.
I never thought to get the extended release as I always just slingshot the bolt.
-
November 27th, 2010, 09:56 AM #6
Re: Looking to upgrade my Ruger MkII with some Volquartsen parts, need some advice
Funny enough, I'm not getting the extended release for closing the bolt, I am getting it so I can lock the bolt open easier.
I just ordered 130$ worth of Volquartsen parts last night from Midway. I would have gone directly from Volquartsen's site (they are offering free shipping this weekend and a t-shirt or hat with 150$ purchases), but I needed to get some other things and Midway is just a hair cheaper on their parts (which is surprising sometimes). Plus I found a 15$ off of 100$ purchase online (which more than paid for the shipping).
-Zach
Similar Threads
-
Volquartsen Compensator for Ruger MK III?
By rwb1500 in forum PistolsReplies: 12Last Post: March 31st, 2010, 10:59 PM -
Volquartsen Ruger Mark 2 Accurizing Kit $65
By Enfielder in forum GeneralReplies: 1Last Post: December 4th, 2009, 07:48 AM -
Ruger MKII 22/45
By TechTeach in forum GeneralReplies: 0Last Post: October 14th, 2009, 12:15 AM -
Ruger 10/22 w/ Power Customs, Volquartsen, ER Shaw, Hogue, etc.
By COVEJEEPSXJ in forum GeneralReplies: 4Last Post: July 27th, 2009, 10:06 PM -
ruger mkII
By wheels in forum GeneralReplies: 0Last Post: June 19th, 2009, 12:31 AM
Bookmarks