CLOSED

**Mann427** · August 24th, 2010, 05:36 PM

Closed. Refer to other posts.

**Mama Bear 1962** · August 25th, 2010, 09:25 AM

http://pagunsmith.edu/index.php

Try contacting the gunsmithing school there in Pittsburgh. They may be able to point you to someone.

**Xpertz** · August 25th, 2010, 02:43 PM

Originally Posted by Mann427

Im trying to find a place that'll do a Norell's Moly Resin coat for me in the Pittsburgh Area. I dont know too much about refinishing or whatever else its called. I have a Bead Blasted upper and a standard Stag Arms lower. Will I need to bead blast my lower too? Any help will be greatly appreciated.

I do Norells on 1911"s and AR 15's but don't think I want to get into outside work. As far as I'm concerned it is one of the best coatings out there.

It has to be done right though. Do not do it over a bead blasted finish as it will not adhere properly. All parts should be Media blasted with 90 grit Aluminum Oxide.

You can do it yourself if you Follow the instructions. It is not really that hard to do.

http://www.johnnorrellarms.com/molyresin_tips.asp