Results 1 to 9 of 9
Thread: 300BO 220gr projectiles
-
February 16th, 2018, 01:07 PM #1Junior Member
- Join Date
- Feb 2017
- Location
-
Red Lion,
Pennsylvania
(York County) - Posts
- 21
- Rep Power
- 0
300BO 220gr projectiles
Looking to see if there is any intrest in a group purchase. Everglades has some nice looking plated stuff. 200 a thousand and free shipping. Open to other suggestions but prefer to stick with plated.
-
February 16th, 2018, 07:14 PM #2
Re: 300BO 220gr projectiles
I know you may want to stick with plated but I can save you $50 a thousand with the coated cast that I manufacture.
You can PM me or check out my website link in my sig line. Plenty of people on this forum can vouch for my products.www.Steelvalleycasting.com is your new home for coated bullets and custom ammo.
-
May 27th, 2018, 12:58 PM #3
Re: 300BO 220gr projectiles
I know there was previous discussion about this but I don't recall the outcome or able to find the thread....but can these be run subsonicly through a can?
-
May 27th, 2018, 01:52 PM #4
Re: 300BO 220gr projectiles
Our bullets can be run subsonic through a can. I run our 147grain 9mm RN through a can every weekend in a 9mm SBR in either IDPA, Steel Challange, or a USPSA match.
So can Rogers, Acme, or any other coated bullet.
Where we stand out is cost and near match grade accuracy from a cast bullet.www.Steelvalleycasting.com is your new home for coated bullets and custom ammo.
-
May 27th, 2018, 02:31 PM #5
Re: 300BO 220gr projectiles
"It seems that the Constitution is more or less guidelines than actual rules"
My feedback: http://forum.pafoa.org/showthread.php?t=305685
-
May 27th, 2018, 03:06 PM #6
Re: 300BO 220gr projectiles
Yes. Mine have a boat-tail and Yes you need an expander die.
Because the lead is softer than copper or brass it will not expand the case mouth without scraping the coating and some lead off. Same reason to expand pistol case mouths.
I would also recommend a Factory Crimp Die from Lee to reset the case mouth after expanding.
A good expander is the Lyman Type-M short case expander. I think they are in the $20 range.Last edited by DucatiRon; May 27th, 2018 at 03:10 PM.
www.Steelvalleycasting.com is your new home for coated bullets and custom ammo.
-
May 27th, 2018, 05:13 PM #7
-
June 19th, 2018, 08:55 PM #8
Re: 300BO 220gr projectiles
ordered a 100 of these to play with. so far very happy.
8.5" suppressed psa upper.
10.couple Gs of A1680
lee dies
not positive off the top of my head on the OAL.
357mag expander/power through with an m1 carbine plug in it....expands the necks perfectly and cycles a lee auto disc powder measure.
results in rds that are subsonic and cycle 100%....ejection is at the 430 position and only throw the brass 3-4' almost in a pile.
will be ordering a 1000 couple more shortly.it's only metal, we can out think it....
-
June 19th, 2018, 09:25 PM #9
Re: 300BO 220gr projectiles
Thanks Brian,
Glad you like them.www.Steelvalleycasting.com is your new home for coated bullets and custom ammo.
Bookmarks