Results 1 to 10 of 10
Thread: HKS Speedloader for Taurus 85
-
February 13th, 2009, 10:09 PM #1
HKS Speedloader for Taurus 85
I have a Taurus 85, picked up an HKS model 36 speed loader for it that had my model listed on the packaging. It doesnt fit the gun, as the chamber pattern is just a bit wider than the pattern on the speedloader. The rounds slide in, but get cocked and jam inside the speedloader.
For those with 85s, which model HKS works in your guns? Did I just get a bad loader, or do I have the wrong model?
edit: I thought to double check their site, and it has the model 36-A labeled as correct for the Taurus, so i know it should fit.
double edit: Just checked two other ammo types, in case that was the issue (maybe wider rim), and both WWB lrn and Remington FMJs have the exact same issue.
help.Last edited by CommonHighrise; February 13th, 2009 at 10:20 PM.
-
February 13th, 2009, 10:58 PM #2
Re: HKS Speedloader for Taurus 85
Just checked my listings and it looks like the 36-A is the right one.
http://all-in-general.com/product_in...ducts_id=27974
Although I don't own one, so I can't tell you from experience. However, I do have a Taurus 85 SS UltraLite that I'm pretty fond of Maybe I'll check out one of these speed loaders sometime soon and see how it works for me.
-
February 13th, 2009, 11:02 PM #3
Re: HKS Speedloader for Taurus 85
-
February 14th, 2009, 12:20 AM #4Member
- Join Date
- Oct 2008
- Location
-
Central PA,
Pennsylvania
(York County) - Posts
- 58
- Rep Power
- 17
Re: HKS Speedloader for Taurus 85
I have a 85 Ultralite and use a model 36 (actually a few of them) with no problems speed loading.
Guns only have two enemies: rust and politicians.
-
February 14th, 2009, 12:30 AM #5
Re: HKS Speedloader for Taurus 85
-
February 14th, 2009, 12:40 AM #6
Re: HKS Speedloader for Taurus 85
Knowing Taurus, they just punched 5 holes in the cylinder in any location they felt like on that day.
-
February 14th, 2009, 01:01 AM #7
Re: HKS Speedloader for Taurus 85
-
February 14th, 2009, 01:33 AM #8
-
February 14th, 2009, 05:28 AM #9
Re: HKS Speedloader for Taurus 85
36 works on mine. CR, are you trying to shove the whole thing in at once? Because once I get the nose in I release the rounds and let gravity do the work.
-
February 14th, 2009, 10:55 AM #10
Re: HKS Speedloader for Taurus 85
I insert the loader until its center pivot pin touches the latch pin on my cylinder, and twist. Its the way Ive always loaded my .357.
I gave what you're saying a shot, and it does work sitting here still, but I just don't see it working out if Im moving around in a high stress situation. Dropping my reload immediately after a firefight sounds like a bad idea.
Going back to HKS.
Similar Threads
-
Magazines, Speedloader, and Other Items
By knight0334 in forum GeneralReplies: 3Last Post: February 17th, 2009, 11:44 AM -
Taurus 44mag Tracker Speedloader?
By gander215 in forum GeneralReplies: 2Last Post: January 8th, 2009, 02:42 PM -
Horizontal Mount Speedloader Rig
By skycop in forum GeneralReplies: 3Last Post: November 30th, 2008, 12:29 PM -
Speedloader for O/U or SxS shotguns.
By Edmond in forum GeneralReplies: 12Last Post: November 7th, 2008, 10:11 AM -
Need Speedloader Advice
By CommonHighrise in forum GeneralReplies: 8Last Post: May 1st, 2008, 10:34 PM
Bookmarks