Results 1 to 10 of 28
-
June 20th, 2011, 07:01 PM #1
HANDGUN RECALL THREAD: Post Recall information/notices here
Please post any/all handgun or pistol MFG or importer recalls in this thread.
Be concise, copy/paste all recall info, and if possible, link the original source.
this is for OFFICIAL RECALL info ONLY, all other posts will be deleted.Last edited by JayBell; June 21st, 2011 at 10:08 PM.
"Oderint Dum Metuant" - BMFH
"Tact is for people not witty enough to use sarcasm"
Note: any whingeing crazy that hits my PM inbox will be deleted without reply
-
September 8th, 2011, 01:13 AM #2Grand Member
- Join Date
- Aug 2007
- Location
-
There's no place like ~
- Posts
- 2,727
- Rep Power
- 168990
Re: HANDGUN RECALL THREAD: Post Recall information/notices here
Glock is replacing recoil spring assemblies, free of charge, for all G4's sold prior to 7/22/2011. G4 26's and 27's are not involved in this "voluntary exchange". See the Official Announcement for details.
-
April 18th, 2012, 04:27 PM #3
Re: HANDGUN RECALL THREAD: Post Recall information/notices here
posted in threads before, but this is an official sticky
Beretta U.S.A. Corp. has discovered a potential condition with Beretta .22 caliber NEOS semiautomatic pistols in which the pistol will fire even if the safety is activated and, in some cases, the pistols may fire if the safety is moved from the OFF to the ON position. Chances of either of these situations occurring is extremely remote and no injuries have occurred because of this condition, however, because of safety concerns relating to this situation, Beretta U.S.A. Corp. is immediately implementing a recall of Beretta .22 caliber NEOS semiautomatic pistols.
-
April 18th, 2012, 04:48 PM #4
Re: HANDGUN RECALL THREAD: Post Recall information/notices here
Adding ammo recall.....
2/22/12
Hornady® Recalls 7 Lots of 500 S&W 300 grain FTX®
Custom™ Pistol Ammo
Grand Island, NE – Hornady® Manufacturing announced the recall of seven lots of 500 S&W 300 gr. FTX® Custom™ pistol ammunition. Hornady ballisticians have determined that some cartridges from Lot numbers 3101327, 3110256, 3110683, 3110695, 3110945, 3111388, 3111885, may exhibit excessive chamber pressures. Use of this product may result in firearm damage and/or personal injury.
https://app.e2ma.net/app/view:Campai...226e71b76:eek:Last edited by tl_3237; April 18th, 2012 at 04:51 PM.
IANAL
-
October 22nd, 2012, 08:39 PM #5Senior Member
- Join Date
- Mar 2012
- Location
-
Monroe County
(Monroe County) - Posts
- 261
- Rep Power
- 379506
Re: HANDGUN RECALL THREAD: Post Recall information/notices here
CARACAL F AND C PISTOL SAFETY WARNING AND RECALL NOTICE
Caracal USA has determined a potential condition of the trigger unit in a very limited number of Caracal F and C pistols that could possibly allow the pistol to fire when dropped onto a hard surface with a round in the chamber. Although Caracal USA has not received any reports of injuries, it is initiating this voluntary recall to protect the safety of its customers because of the remote possibility of an unintentional discharge occurring.
The affected Caracal pistols have serial numbers that begin with B, C, F, L, or M. If your pistol's serial number begins with one of these letters, please follow the following steps.
Only the Caracal F and C pistols with the serial numbers identified above are affected by this recall. If your pistol has a different serial number, it is not subject to the recall.
If you own a Caracal F or C pistol with a serial number identified as being affected by this recall, please do not load or fire your Caracal F or C pistol and contact us immediately to arrange to have the trigger unit replaced, completely free of charge, using the following steps:
Step 1 - Contact us at 205-655-7050 (Monday-Friday 8-5 Central Standard Time), or at info@caracal-usa.com and provide the model and serial number of your pistol.
Step 2 - After contacting us, we will send you a prepaid overnight shipping box with instructions so that you can return your pistol to us, free of charge.
Step 3 - Your firearm will be returned as quickly and efficiently as possible.
We apologize for any inconvenience that this may cause, and to thank you for your patience and cooperation, we will send you a free magazine when we return your pistol to you.
For more information, you may visit www.caracal-usa.com or call Caracal USA at 205-655-7050
-
December 11th, 2012, 06:27 PM #6
Re: HANDGUN RECALL THREAD: Post Recall information/notices here **** WALTHER PK380***
*JUST SAW THIS WHILE LOOKING FOR A NEW WALTHER*
IMPORTANT SAFETY RECALL NOTICE - October 4, 2012
PRODUCT:
Walther PK380, .380 ACP
DESCRIPTION OF THE HAZARD:
Walther has identified a condition that may exist in certain PK380 pistols which may permit a round to be discharged if the trigger is pulled, despite engagement of the manual safety. Walther has found that engagement of the manual safety may not prevent firing of a chambered round when the trigger is pulled.
DESCRIPTION OF THE PRODUCT INVOLVED:
This recall applies to Walther PK380, .380 ACP pistols manufactured by Carl Walther GmbH from May, 2012 to September, 2012, and which have a Serial Number ranging from
PK 101201 to PK 112155
REMEDY/ACTION TO BE TAKEN:
STOP USING YOUR PISTOL, and UNLOAD IT IMMEDIATELY, exercising EXTREME CARE in doing so AND RETURN IT TO WALTHERAMERICA AT ONCE.
Any unintended discharge of a firearm has the potential for causing injury or even death, and we ask that you stop using your pistol immedi-ately. When unloading your pistol, please take extreme care to ensure that your firearm is pointed in a safe direction.
To facilitate inspection and the repair of your pistol, please contact Waltheramerica customer service department to receive instructions for the return of your pistol to Waltheramerica, care of Smith & Wesson.
Your pistol will be repaired at no cost to you. Your firearm will be returned as quickly and efficiently as possible. All shipping and repair costs will be covered by Waltheramerica.
CONSUMER CONTACT:
To receive a FedEx pre-paid billable stamp and shipping instructions click here or contact Waltheramerica directly at 1-800-713-0356. Please allow 2-3 weeks to receive the shipping materials and information packet from us.
-
April 10th, 2013, 06:55 PM #7
Re: HANDGUN RECALL THREAD: Post Recall information/notices here
Battenfeld Technologies Recalls Three-Digit Combination Locking Handgun Vaults Due to Lock Malfunction
Consumers should stop using this product unless otherwise instructed. It is illegal to resell or attempt to resell a recalled consumer product.
Recall Summary
Name of product: Compact and Large Handgun Security Vaults
Hazard: The lock can fail and allow unintended access to the contents of the vault.
Consumer Contact: Battenfeld Technologies Inc., toll free at (877) 509-9160 between 8 a.m. and 5 p.m. CT Monday through Friday, or online at www.lockdownvaults.com and click on “Product Recall.”
Units: About 3,900 in the U.S. and about 100 in Canada
Description: This recall is for combination lock models of Lockdown® Compact and Large handgun security vaults. The vaults are black, steel cases used to store handguns or other valuables at home, in the car or when traveling. The Compact vault’s interior is 5.25 inches wide, 8.25 long and 1.5 inches deep and can store most compact automatics and revolvers. The Large vault’s interior is 6.125 inches wide, 9.75 inches long and 1.5 inches deep and can store most full-sized automatics and revolvers with barrels up to 4 inches long. The vaults are lined with foam padding in the top and bottom and are secured by a three-digit combination lock. A label with the words “Lockdown” and “www.lockdownvaults.com” is located to the left of the combination lock. The serial number is located on a paper label on the inside surface of the vault bottom under the foam. Recalled Compact and Large vaults have serial numbers from ST120002600 to ST120006800.
Incidents/Injuries: None reported
Remedy: Consumers should immediately stop using the recalled handgun vaults and contact Battenfeld Technologies to return the vault for a full refund.
Sold at: Small sporting goods and specialty stores nationwide and online retailers from May 2012 to Mar 2013 both for around $21.
Importer: Battenfeld Technologies Inc., of Columbia, Mo.
Manufactured in China
http://www.cpsc.gov/en/Recalls/2013/...Vaults/#Remedy
-
August 22nd, 2013, 05:36 PM #8Senior Member
- Join Date
- Apr 2011
- Location
-
SomewhereInLehigh,
Pennsylvania
(Lehigh County) - Posts
- 421
- Rep Power
- 413865
Re: HANDGUN RECALL THREAD: Post Recall information/notices here
S&W M&P Shield Safety Alert
PRODUCT:
ALL M&P Shield™ firearms manufactured before August 19, 2013.
DESCRIPTION OF THE HAZARD:
Smith & Wesson has identified a condition where the trigger bar pin could damage the lower trigger in certain M&P Shields in a way that may affect the functionality of the drop safety feature of the firearm, potentially allowing the pistol to discharge if it is dropped.
More details here:
http://www.smith-wesson.com/webapp/w...8_757978_image
-
August 28th, 2013, 07:41 PM #9
Re: HANDGUN RECALL THREAD: Post Recall information/notices here
3.3 XD-S™ SAFETY RECALL
Issued August 28, 2013
Springfield Armory® is initiating this voluntary safety recall to upgrade 3.3 XD-S™ 9mm and 3.3 XD-S™ .45ACP pistols with new components, which eliminate the possibility of a potentially dangerous condition. We want to emphasize that no injuries have been reported to date.
Springfield has determined that under exceptionally rare circumstances, some 3.3 XD-S™ 9mm and .45ACP caliber pistols could experience an unintended discharge during the loading process when the slide is released, or could experience a double-fire when the trigger is pulled once. The chance of these conditions existing is exceptionally rare, but if they happen, serious injury or death could occur.
What should you do?
STOP USING YOUR 3.3 XD-S™ 9mm or .45ACP PISTOL AND CAREFULLY UNLOAD IT!
To begin the upgrade process and for fastest response, go to www.springfieldrecall.com. Request a return authorization for the 3.3 XD-S™ Recall. You will need to provide your name, address, phone number, email address and the serial number of your 3.3 XD-S™. The serial number is located on the frame beneath the dust cover (accessory rail).
If you don’t have computer access you may initiate the upgrade process by calling 800-680-6866. If you no longer own the 3.3 XD-S™ 9mm or .45ACP pistol, please advise Springfield of the current owner.
What pistols are involved?
This Safety Recall applies only to:
Springfield 3.3 XD-S™ 9mm pistols - serial numbers between XS900000 and XS938700.
Springfield 3.3 XD-S™ .45ACP pistols - serial numbers between XS500000 and XS686300.
This Safety Recall does not apply to any XD® or XD(M)® pistols.
What will Springfield do?
Springfield will send you a return authorization and mailing label, allowing you to return your 3.3 XD-S™ 9mm or .45ACP pistol to Springfield at no cost to you. Springfield will upgrade your 3.3 XD-S™ 9mm or .45ACP pistol with the new components, and return it to you. Springfield will provide tracking numbers so you can monitor the receipt and return of your upgrades.
Questions?
Visit www.springfield-armory.com for further information about this safety recall. You can reach Springfield at 800-680-6866. Springfield apologizes for this inconvenience, but your safety is our paramount concern.
We greatly appreciate your loyalty to Springfield products.
http://www.eastexshooting.com/Notice.pdf
_____
Note: there are reports that the website is having issues with certain serial numbers...if your pistol falls within the range but the website is giving you a hard time, call Springfield directly.
-
August 30th, 2013, 11:11 AM #10Member
- Join Date
- Oct 2012
- Location
-
Neck of the Woods,
Pennsylvania
(Bucks County) - Posts
- 88
- Rep Power
- 1079
Re: HANDGUN RECALL THREAD: Post Recall information/notices here
XDS 9MM RECALL
Springfield says the pistol could fire unintentionally when the slide is released or it may “double-fire” and fire twice with one pull of the trigger. I urge all my readers to check the serial numbers of their XDS handguns immediately, this is a serious safety issue.
You can read more about the recall at Springfield’s official recall page where you can also file an online claim for a shipping label and service.
Similar Threads
-
New Forum/Subforum: Recall Notices
By FNG19 in forum Support & SuggestionsReplies: 21Last Post: June 21st, 2011, 10:10 PM -
Ruger LCP NIB Post recall
By Hog Sniper in forum GeneralReplies: 3Last Post: October 22nd, 2009, 12:28 AM -
Ruger LCP Post-recall Never Fired
By Robert Kayland in forum GeneralReplies: 0Last Post: August 17th, 2009, 01:59 PM
Bookmarks