Results 1 to 7 of 7
-
February 13th, 2017, 12:21 AM #1Junior Member
- Join Date
- Sep 2012
- Location
-
Covington,
Georgia
- Age
- 91
- Posts
- 6
- Rep Power
- 0
Titegroup load for Speer 115gr JHP 9mm
Hi: (old resident of Latrobe) Looking for a load for a Speer Bullet that is not in my old Speer Manual (1974). Have Titegroup and Win 231 on hand that I want
to try out. 115 gr Speer JHP.
-
February 13th, 2017, 12:26 AM #2
Re: Titegroup load for Speer 115gr JHP 9mm
-
February 13th, 2017, 12:42 AM #3Junior Member
- Join Date
- Sep 2012
- Location
-
Covington,
Georgia
- Age
- 91
- Posts
- 6
- Rep Power
- 0
Re: Titegroup load for Speer 115gr JHP 9mm
Thanks for quick responce ! Have looked at that site. My concern is that the Speer hollow point bullet configuration has a longer Bearing Surface than the Rainier 115Gr FMJ that I have loaded. I am especially concerned about this using Titegroup. But thank you for the response.
-
February 13th, 2017, 12:46 AM #4
-
February 13th, 2017, 12:52 AM #5
-
February 13th, 2017, 01:00 AM #6Junior Member
- Join Date
- Sep 2012
- Location
-
Covington,
Georgia
- Age
- 91
- Posts
- 6
- Rep Power
- 0
Re: Titegroup load for Speer 115gr JHP 9mm
Thank you for quick response ! Have looked at that site, . . . concern is, the Speer and Sierra 115gr JHP has a longer Bearing Surface than the Rainier 115gr FMJ that I have been shooting and Titegroup has reputation for being non-forgiving when nearing the max loads. Oldbenn says thanks.
-
February 13th, 2017, 01:07 AM #7Junior Member
- Join Date
- Sep 2012
- Location
-
Covington,
Georgia
- Age
- 91
- Posts
- 6
- Rep Power
- 0
Re: Titegroup load for Speer 115gr JHP 9mm
Got It: Did not recognize SPR GD for what it is. thanks again.
Similar Threads
-
9mm 115gr lead load data
By pensfan76 in forum Ammunition & ReloadingReplies: 6Last Post: September 25th, 2013, 12:53 PM
Bookmarks