Results 1 to 3 of 3
Thread: CCI blazer feed problems
-
June 3rd, 2008, 07:44 PM #1
CCI blazer feed problems
I have a S&W sigma 9m that is picky in what goes through it apparently... I have had no problems with remmington UMC but had lots of problems with winchester white box. I just bought some cci blazer today and was having isues with it jamming on the last round of the mag. Not sure if it the mag, the gun, or the ammo. Any thoughts?
-
June 3rd, 2008, 08:25 PM #2Active Member
- Join Date
- Feb 2007
- Location
-
Jeffersonville,
Pennsylvania
(Montgomery County) - Posts
- 104
- Rep Power
- 871
Re: CCI blazer feed problems
We use CCI Blazer Brass as our range ammo. It's pretty accurate in most guns and we don't see many problems with it. If it's only jamming on the last round, I would make sure the gun and mag are clean and lubed and then try another mag.
JB
-
June 3rd, 2008, 08:38 PM #3
Re: CCI blazer feed problems
if its just last round gets hang up, I would suspect either mag spring or follower, not the ammo.
Fill the mag with 1 UMC(which you stated you have no issue), and rest with WWB and see if probrem remainAudemus jura nostra defendere
Similar Threads
-
WWB or Blazer Brass??
By co41ff in forum GeneralReplies: 10Last Post: February 29th, 2008, 07:50 AM -
RSS Feed
By tes151 in forum GeneralReplies: 2Last Post: February 28th, 2008, 09:47 PM -
Blazer Brass
By DaveM55 in forum GeneralReplies: 12Last Post: December 7th, 2007, 12:10 AM -
Blazer Brass
By PisnNapalm in forum GeneralReplies: 2Last Post: April 25th, 2007, 09:34 AM -
10 Mouths to Feed
By mjd932 in forum GeneralReplies: 42Last Post: March 27th, 2007, 11:20 PM
Bookmarks