Results 1 to 6 of 6
-
November 20th, 2016, 05:50 PM #1
-
November 20th, 2016, 07:06 PM #2
Re: HELP!! Sig P320 safety lever spring location.
Looking at the assembly from the bottom, it's just above your trigger linkage spring, tucked in that little nook, applying pressure on what I believe is part of the safety linkage (the part moved forward by the trigger linkage and pops up under the slide, right side of firearm). You wouldn't notice it in normal operation because the trigger spring is also applying the same force in the same direction.
image 4444.jpgResistance to tyrants is obedience to God.
-
November 20th, 2016, 07:28 PM #3
Re: HELP!! Sig P320 safety lever spring location.
Thank you sir! I figured it had something to do with that because it would not return to the home position any cause issues with putting the slide back on. Thanks again
-
November 20th, 2016, 08:45 PM #4
Re: HELP!! Sig P320 safety lever spring location.
You're welcome, no trouble at all. Does polishing the parts make much of a difference on the P320? I've polished other triggers, but figured this Sig is really nice right out of the box.
I just picked up another full sized plastic grip assembly this week; I'm going to try my hand at grip stippling. I figured for $33 it's worth a try!Resistance to tyrants is obedience to God.
-
November 20th, 2016, 09:51 PM #5
Re: HELP!! Sig P320 safety lever spring location.
The same thing happened to me. Youtube helped me fix it.
"The Constitution is the guide which I will not abandon.” - George Washington
-
November 21st, 2016, 09:57 PM #6
Re: HELP!! Sig P320 safety lever spring location.
Polishing all the parts actually took off a couple pounds of the trigger pull. Really smooth as well. I got the apex flat trigger which is really nice and predictable.
Similar Threads
-
Glock slide stop lever spring broke
By Gi14 in forum GeneralReplies: 6Last Post: August 29th, 2009, 09:38 PM -
SKS safety catch spring
By Warpt762x39 in forum GeneralReplies: 4Last Post: November 10th, 2008, 11:08 AM -
Taurus 24/7 manual safety spring
By dolmock in forum GeneralReplies: 1Last Post: September 12th, 2006, 05:53 PM
Bookmarks