Results 1 to 10 of 17
Thread: blazer brass 9mm ammo issue?
-
April 5th, 2009, 07:29 PM #1Active Member
- Join Date
- Mar 2009
- Location
-
perkasie,
Pennsylvania
(Bucks County) - Posts
- 229
- Rep Power
- 25
blazer brass 9mm ammo issue?
I bought a used ruger p85 from a local gun shop. I got it for decent prize and the gun was clean. This afternoon i was shooting on a relatives property and out of the first 15 rounds i had about 4 jams. Some were live rounds and some were the spent shells getting jammed. All in all i shot about 50 rounds and each clip had a jam of roughyl 3-4 rounds at least. I got the gun home and cleaned it real well and it didnt seem to have to much gunk in it. I am shooting blazer brass 9mm luger 115 grain rounds. Has anyone had an issue with blazer brass?? My father said he has had issue with it as well in his 9mm. Anyone have any ideas as to what the problem could be? Maybe the spring is weak?
-
April 5th, 2009, 07:34 PM #2
Re: blazer brass 9mm ammo issue?
It's basically all I shoot. I don't think it's the ammo I think it's the gun.
One of our members bought that gun for their mother and it would jam like crazy when she shot it. In anyone elses hand the gun ran flawlessly. She was just limp-wristing it.
OI think that's most likely what's happening here.
-
April 5th, 2009, 07:38 PM #3Grand Member
- Join Date
- Jul 2007
- Location
-
Oil City,
Pennsylvania
(Venango County) - Age
- 57
- Posts
- 2,772
- Rep Power
- 418438
Re: blazer brass 9mm ammo issue?
I shoot that in .40 in my Glock all the time, no issues at all
better descriptions of the jams may help as well, most feeding problems are magazine related, most ejection problems are springs, or techniqueLast edited by markheck1; April 5th, 2009 at 07:41 PM.
Glock Pistols.......So simple a Caveman could fix them!
-
April 5th, 2009, 08:16 PM #4
Re: blazer brass 9mm ammo issue?
I had a P95 that I bought new and was having the same trouble with, even with +P ammo. Tore it apart, cleaned it good and didn't have a problem with it after that.
Now that you've cleaned it, I'd take it back out and try it again before searching too hard for a problem that may not exist.
-
April 5th, 2009, 09:28 PM #5Grand Member
- Join Date
- Nov 2007
- Location
-
Chambersburg PA (Pure Appalachia),
Pennsylvania
(Franklin County) - Posts
- 1,649
- Rep Power
- 650477
Re: blazer brass 9mm ammo issue?
"Limp-Wristing" is not a perjorative - it just describes the phenomenon of a shooter new to the sport and new to the semi-auto.
Most semi-autos need a fairly firm (secure) grip so that the recoil of the pistol functions the mechanism correctly. If you are letting the Ruger tip up way too much, or letting it slide in your grip, that is probably the problem.
Try keeping a firmer grip and not a "death-grip", mind you, but a firmer hold that keeps the frame of the pistol from rising too much and keeping your elbow and wrist from flexing so much. Seat the pistol into the palm, against the thumb-web, then close your fingers around it.
Try THAT, before you look to other things for the cause.
Remember, there are only three things involved here: 1-Ammo, 2-Gun, and
3-(of far greater significance) the SHOOTER.
Good luck, enjoy your shooting. Strive for consistency.
Flash
-
April 5th, 2009, 10:47 PM #6
Re: blazer brass 9mm ammo issue?
my guns love the blazer brass.
Peace, Prosperity, and Liberty
-
April 5th, 2009, 10:50 PM #7
Re: blazer brass 9mm ammo issue?
never had a FTF or FTE with Blazer Brass 9mm in my Taurus. Even my reloads are perfect
"When the people fear their government, there is tyranny; when the government fears the people, there is liberty.-Thomas Jefferson
-
April 5th, 2009, 11:49 PM #8
Re: blazer brass 9mm ammo issue?
My Sig eats Blazer 9mm morning noon and night.
I love the smell of gunpowder in the morning.[
R.I.P......Murphy.
-
April 6th, 2009, 01:43 AM #9Super Member
- Join Date
- Mar 2008
- Location
-
Van Down By The Lake,
Pennsylvania
(Allegheny County) - Posts
- 628
- Rep Power
- 4680
Re: blazer brass 9mm ammo issue?
Shot about 150 rounds without any jams last weekend. Springfield XDM 9mm
-
April 6th, 2009, 01:45 AM #10
Re: blazer brass 9mm ammo issue?
Ive heard it shoots dirty from a friend, but ive never shot any blazer. I did just pick up 4 boxes though, so im glad to hear its rather trouble free.
Similar Threads
-
9mm Blazer Brass
By corbetar in forum GeneralReplies: 0Last Post: March 30th, 2009, 10:13 PM -
WWB or Blazer Brass??
By co41ff in forum GeneralReplies: 10Last Post: February 29th, 2008, 07:50 AM -
Blazer Brass
By DaveM55 in forum GeneralReplies: 12Last Post: December 7th, 2007, 12:10 AM -
Blazer Brass
By PisnNapalm in forum GeneralReplies: 2Last Post: April 25th, 2007, 09:34 AM
Bookmarks