Results 1 to 1 of 1
-
November 30th, 2009, 01:27 AM #1
Shooting P-22 w n w/o Suppressor problems
Ok when I first got my P-22 I shot about 200 rds through it w/o the suppressor on it. With the sight that came installed on the front (tallest one) at about 30ft it was hitting about 3-4" high but it was very consistant using rem. golden bullets. I put the suppressor on using either CCI standard velocity or rem. sub-sonics it shot exactly the same having about 200rds through it. I went out wednesday and shot it w/o the suppressor and now its hitting about 3-4" low not high anymore, I put the suppressor back on and its shooting normal 3-4" high. I went to an indoor range where It was a controlled environment, not sitting on a block shooting a steel target and its still shooting funny. Its like the gun had a reset button and I pushed it on accident. If anything I thought it would be hitting high with the higher velocity ammo but its actually doing the opposite. Has anybody else had this happen to them with a suppressor? What could be the problem?
Similar Threads
-
SBR or suppressor? Both? What to do...
By FineUpstanding in forum GeneralReplies: 3Last Post: March 22nd, 2009, 01:19 AM -
.40 suppressor
By PAallterrain in forum GeneralReplies: 5Last Post: November 25th, 2008, 02:19 AM -
WTB: Suppressor For 9mm AR-15
By JohnB in forum GeneralReplies: 0Last Post: June 5th, 2008, 12:22 AM -
What suppressor?
By K31 in forum GeneralReplies: 9Last Post: June 2nd, 2008, 03:43 PM -
Suppressor for 22/45
By bert304 in forum GeneralReplies: 9Last Post: October 18th, 2007, 09:46 PM
Bookmarks