Results 1 to 5 of 5
Thread: Trouble removing FSB
-
August 22nd, 2008, 09:49 AM #1
Trouble removing FSB
I was trying to remove the FSB on my AR today and the pins will not budge. I ensured I was tapping them from the correct side. After a while I gave up because they had not moved one bit. The only thing I accomplished was taking some chunks out of the pins. Does anyone have any suggestions on how to get these pins out? Thanks for any help
-
August 22nd, 2008, 10:27 AM #2Banned
- Join Date
- Apr 2008
- Location
-
...
- Posts
- 4,125
- Rep Power
- 0
Re: Trouble removing FSB
You'll get a faster answer here: http://www.ar15.com/forums/forum.html?b=3&f=4
-
August 22nd, 2008, 04:17 PM #3
Re: Trouble removing FSB
They are roll pins and tight as hell. Every set I ever took out ended up being trashed. I keep extra sets around now. I use hardened steel punches and a healthy hammer.
Lycanwhackthrope
I taught Chuck Norris to bump-fire.
-
August 22nd, 2008, 10:05 PM #4
Re: Trouble removing FSB
A BFH, my favvvorite tool.
-
August 24th, 2008, 02:00 PM #5
Re: Trouble removing FSB
Thanks for the help. Well it's good to know that this is common and they are supposed to be like that. Time to order some new pins.
Similar Threads
-
Removing the crimp on primer pockets
By bert304 in forum GeneralReplies: 36Last Post: April 28th, 2019, 01:02 AM -
Could use an adviser on removing RPK Stock
By Winbettor in forum GeneralReplies: 0Last Post: August 1st, 2008, 05:32 PM -
Question about removing a charge I did not recieve (York, PA)
By Bacondoggy in forum GeneralReplies: 11Last Post: August 1st, 2008, 10:44 AM -
Hoodish Easy Bake Oven For Removing Cosmo
By Willtallica in forum GeneralReplies: 3Last Post: March 13th, 2007, 07:33 PM
Bookmarks