Results 21 to 30 of 44
-
July 12th, 2020, 12:19 PM #21
Re: Congress Looking to Ban Milling Machines. It isn't just 3D Printing Anymore.
You could make a sand cast mold from your lower and use polymer to make them. Guns aren't exactly rocket science.
-
July 12th, 2020, 12:30 PM #22
Re: Congress Looking to Ban Milling Machines. It isn't just 3D Printing Anymore.
What milling machine would you recommend? Something on a budget that works pretty well.
-
July 12th, 2020, 12:31 PM #23
Re: Congress Looking to Ban Milling Machines. It isn't just 3D Printing Anymore.
-
July 12th, 2020, 01:13 PM #24Super Member
- Join Date
- Feb 2015
- Location
-
Montco,
Pennsylvania
(Montgomery County) - Posts
- 866
- Rep Power
- 21474846
Re: Congress Looking to Ban Milling Machines. It isn't just 3D Printing Anymore.
-
July 12th, 2020, 01:21 PM #25
Re: Congress Looking to Ban Milling Machines. It isn't just 3D Printing Anymore.
Here's a deal: https://lancaster.craigslist.org/tls...157988714.html
Rules are written in the stone,
Break the rules and you get no bones,
all you get is ridicule, laughter,
and a trip to the house of pain.
-
July 12th, 2020, 01:50 PM #26
Re: Congress Looking to Ban Milling Machines. It isn't just 3D Printing Anymore.
selling your equipment?
i see this is pushed by raskin and sponsored by ciciline and swalloswell.
they ARE insane enough to come for your cordless drills, raskin was proposing searching out of state vehicles for firearms and detaining individuals for "days" to verify the carry permits of OOS people back during the national reciprocity debates.
...the ones we had fought ryan tooth and nail for, before cocaine turtle kicked the can down the road ensuring it'd never see a vote or the light of day.
people have been making guns with hand tools for hundreds of years.
...and then they came for the welders...
from some german neonazi, anti-semite far left wing attack.
https://homemadeguns.wordpress.com/2...ubmachine-gun/Last edited by fallenleader; July 12th, 2020 at 02:06 PM.
There is no way to make it out alive...
-
July 12th, 2020, 04:56 PM #27
Re: Congress Looking to Ban Milling Machines. It isn't just 3D Printing Anymore.
The gun banning communists usually do a couple of steps first before out right bans so they're jumping ahead. Usually they come up with a registration scheme like keeping a database on who these machines are sold to an call it a Record of Sale to disguise their intentions of first registering then when they pass laws banning them they know where to go to get the machines.
Corruption is the default behavior of government officials. JPC
-
July 12th, 2020, 06:36 PM #28Grand Member
- Join Date
- Dec 2011
- Location
-
Where the amish roam,
Pennsylvania
(Lancaster County) - Posts
- 2,812
- Rep Power
- 21474851
-
July 12th, 2020, 06:53 PM #29
Re: Congress Looking to Ban Milling Machines. It isn't just 3D Printing Anymore.
Rules are written in the stone,
Break the rules and you get no bones,
all you get is ridicule, laughter,
and a trip to the house of pain.
-
July 12th, 2020, 07:57 PM #30Super Member
- Join Date
- Feb 2015
- Location
-
Montco,
Pennsylvania
(Montgomery County) - Posts
- 866
- Rep Power
- 21474846
Re: Congress Looking to Ban Milling Machines. It isn't just 3D Printing Anymore.
Keep in mind that tooling will cost hundreds, if not thousands, too. 4 jaw, collet chuck, collets, quick change tool post, tons of tool holders, live centers, cutting tool blanks, carbide holders, carbide inserts. Oh, an then you use your buddies lathe (or a work lathe) that has a DRO... gotta add that. Then a full floating tapping head, set of knurling wheels, tool post grinder, flood coolant, tail stock coolant....
Just know when to say "when", I don't have half that stuff for my lathe, but I'm easily at $1000 in extra stuff....
Similar Threads
-
Lower Milling
By esh21167 in forum GunsmithingReplies: 36Last Post: February 4th, 2020, 05:24 PM -
AR milling jig
By jbraun948 in forum GunsmithingReplies: 0Last Post: March 10th, 2014, 03:32 AM -
Hk USC/ump milling
By BIRTHMACHINE in forum GeneralReplies: 3Last Post: December 10th, 2009, 09:18 AM -
Rahm trying to intimidate Congress?? Congress pushin back !!
By PocketProtector in forum GeneralReplies: 1Last Post: August 4th, 2009, 03:12 PM -
Milling machine
By BAD_KARMA in forum GeneralReplies: 0Last Post: May 10th, 2009, 08:21 PM
Bookmarks