Results 1 to 6 of 6
Thread: So...my birthday is on saturday
-
March 3rd, 2009, 11:35 AM #1
So...my birthday is on saturday
And Midway gives you a bonus birthday discount, so I figured I'd buy a few of the reloading items I need to get started.
I decided to buy the manual first and read through it to go further on what I already know. They have a bundle single stage press with the latest rev of modern reloading that I decided to get.
Im not sure what press type I want, but I decided that I would dedicate the "freebie" single stage press to depriming (for now) since I have a lot of brass already. So I added in the appropriate shell holder and universal depriming/decapping die.
I figure I can deprime what I have so that when Im ready to go further with buying the tumbler etc I've already got deprimed brass. I just need to confirm the order with the boss
-
March 3rd, 2009, 05:22 PM #2Senior Member
- Join Date
- Sep 2008
- Location
-
Louisville,Alabama
- Posts
- 357
- Rep Power
- 160
Re: So...my birthday is on saturday
If you really want to start cheap, and just want to de-cap brass first, get the Lee Hand press through Midway part # 410-804 $24.49, and a Lee universal depriming and de-capping die Part # 136-543 $8.99, and the shell holder for what ever brass your depriming.
It's a cheap way to get that done, and, all you need to do is add the regular dies later if you want to do it without a bench press.
You can sit in your recliner in front of the TV and deprime all night, and, later, after you move up, you have a handy loader to take to the range with you for on-the-spot changes.
Midway will sell all the shell holders seperate from die sets also, for about $3-$4.
Just a suggestion.
-
March 3rd, 2009, 05:27 PM #3Senior Member
- Join Date
- Sep 2008
- Location
-
Louisville,Alabama
- Posts
- 357
- Rep Power
- 160
Re: So...my birthday is on saturday
PS, If you do this, and de-prime in the recliner, always remember to lay a towel in your lap.
My wife used to really get ticked when she would run over a used primer with the Hoover.
They really make a racket in the turbo-brush.
-
March 3rd, 2009, 06:25 PM #4
Re: So...my birthday is on saturday
Invitation is still open any time to see my setup. Might just cure you of the single stage desire.
I do want a hand press though...
-
March 3rd, 2009, 08:19 PM #5
-
March 3rd, 2009, 09:14 PM #6
Similar Threads
-
saturday 2-14
By brian in forum GeneralReplies: 16Last Post: February 14th, 2009, 05:45 PM -
SO WHERE WILL YOU BE SATURDAY!
By Bmarshall91 in forum GeneralReplies: 10Last Post: December 21st, 2008, 01:38 AM -
Birthday range day
By Bullgatti in forum GeneralReplies: 6Last Post: October 17th, 2008, 02:41 PM -
Happy Birthday 338!
By shefearsnothing in forum GeneralReplies: 6Last Post: August 23rd, 2008, 09:17 PM -
How far away is Saturday!
By XUSNORDY in forum GeneralReplies: 14Last Post: April 29th, 2008, 01:45 PM
Bookmarks