Help with muzzy's

[fingers80002]

I can't seem to get these things assembled.
The directions on the package suck!!!!!!!

They are 125gr 3 blade 1 3/16".

[Dredly]

There is a trick to it...

**Blades are SHARP**

Place the blades into the tip piece (Ferule) so that they bend around one of the corners and the rounded section is facing up, they basically all fit in together.

Is that confusing enough? :P

Each blade has a bend in it, this bend needs to go on the inside if the cutout space so that all that is coming out is the straight blade section. Put all the blades in approx 1/2 way (1/2 way down the ferule, not at the bottom) and then then all 3 blades are in there push them all to the bottom together, then screw the tip on.

I would suggest trying with the PRACTICE blades first as they are dull.

[fingers80002]

There is a trick to it...

**Blades are SHARP**

Place the blades into the tip piece (Ferule) so that they bend around one of the corners and the rounded section is facing up, they basically all fit in together.

Is that confusing enough? :P

Each blade has a bend in it, this bend needs to go on the inside if the cutout space so that all that is coming out is the straight blade section. Put all the blades in approx 1/2 way (1/2 way down the ferule, not at the bottom) and then then all 3 blades are in there push them all to the bottom together, then screw the tip on.

I would suggest trying with the PRACTICE blades first as they are dull.

Tell ya what, you want them, there yours!!!!!!

[Arch007er]

Tell ya what, you want them, there yours!!!!!!

LOL, if you want a mean lookin' fixed blade, check out Maniacs by Aftershock Archery. Same style as muzzy's, easy assembly.

http://www.rudyssporting.com/xcart/a...roadheads.html



PS sorry dredly ;p

[fingers80002]

LOL, if you want a mean lookin' fixed blade, check out Maniacs by Aftershock Archery. Same style as muzzy's, easy assembly.

PS sorry dredly ;p

I'm looking for something that can be assembled, and works.

I need fixed blades for my old bow.

These things can't work, the way I'm looking at them.

[Arch007er]

Those maniacs are just simple to assemble, all you do is slide the blade down and it has 2 hooks that latch in, no screws or anything. Now I can't tell ya how well this thing works, since I just got them, but man they look damn fine.

[fingers80002]

How about Grim Reaper Hades?

That is a retention system that can work.

[Arch007er]

Do you mean rage broadheads, the expendables?

[fingers80002]

Do you mean rage broadheads, the expendables?

Check the edit........

[Dredly]

I'm looking for something that can be assembled, and works.

I need fixed blades for my old bow.

These things can't work, the way I'm looking at them.

easy there buddy... easy

Muzzy's work great once you get them together.


1. Hold the ferule (the pretty colored part) by the threads

2. Take a blade in your hand, hold it with the sharp part in towards you hand and the rounded part facing up. You will see that there is a bend in the blade (it should be bending back around the tip of your finger.)

3. Insert the blade so that the actual rounded section is facing into the middle of the ferule, the bent part of the blade will look like it is going out of the blade slot to the left of the one your blade is hanging out of

4. Take the next blade, hold it the same way and place it in the slot to the left of the blade you just put in, once again putting the bend in the middle. You will see that the sharp blade area from the new blade is now on touching the wrap around piece from the first blade.

Repeat step 4 with the last blade. now all 3 rounded sections will be facing up in the ferule.

Step 5 - tighten down the tip with the supplied wrench


If you want you can PM me and send me your phone number. Once you get it to work once its cake after that.