Results 1 to 10 of 25
Thread: taking apart an ak
-
June 23rd, 2009, 05:22 PM #1Junior Member
- Join Date
- Jun 2009
- Location
-
tioga,
Pennsylvania
(Tioga County) - Posts
- 9
- Rep Power
- 0
taking apart an ak
i have purchased a m70 underfolder parts it from apex gun parts to build a low cost ak. i have never attempted this before. my question is how exactly do i get it apart do i need to cut the rivets and drill them out or finish cutting the reciever apart. this is just the beginning i will have many questions later on. i dont have it yet but i hope it will come early next week i also have a wasr 10 so i kinda have a basic ak concept. thanks
-
June 23rd, 2009, 05:24 PM #2Member
- Join Date
- May 2007
- Location
-
north east,
New Jersey
- Posts
- 71
- Rep Power
- 217
Re: taking apart an ak
go over to akfiles.com and join up all your information is there
-
June 23rd, 2009, 05:29 PM #3
Re: taking apart an ak
you've got alot more coming too you than I think you thought you did... You will have almost the same or more money in a kit to build up than just buying the m70 already completed. You will be needing 6 or 7 us made parts put into it to make it legal and many differnet tools to even complete the job...
Here is a good place to start reading...
http://www.akfiles.com/forums/showthread.php?t=33108Please visit my Website for Exotic ammunition and 37mm goodies... http://gunshowgoods.com
-
June 23rd, 2009, 05:37 PM #4Junior Member
- Join Date
- Jun 2009
- Location
-
tioga,
Pennsylvania
(Tioga County) - Posts
- 9
- Rep Power
- 0
Re: taking apart an ak
i understand its not an overnight project and yes i know i need us compliant parts. but these things have been going for around 500 i should be able to do it for less i have most of what i need and if i think its too much i will sell the kit.
-
June 23rd, 2009, 05:38 PM #5
Re: taking apart an ak
how much did you pay for the kit? is it a stamped or milled kit?
I bought a bunch of Romy G kits several years back for $99 each it ended up costing me about $350 total at that time to build them up. Now the same kit costs me 300ish plus 200ish for compliant crap = 500 for just the run of the mill AK without anything fancy.Last edited by bige64; June 23rd, 2009 at 05:44 PM.
Please visit my Website for Exotic ammunition and 37mm goodies... http://gunshowgoods.com
-
June 23rd, 2009, 05:51 PM #6
Re: taking apart an ak
All of your answers can be found on http://www.theakforum.net/. It is a great group of guys that know their AK's. Go to the build section and all of your questions will disappear.
-
June 23rd, 2009, 05:59 PM #7Junior Member
- Join Date
- Jun 2009
- Location
-
tioga,
Pennsylvania
(Tioga County) - Posts
- 9
- Rep Power
- 0
Re: taking apart an ak
paid 250 for the kit from apex gun parts. thanks for the links i am looking through them now.
-
June 23rd, 2009, 06:01 PM #8Junior Member
- Join Date
- Jun 2009
- Location
-
tioga,
Pennsylvania
(Tioga County) - Posts
- 9
- Rep Power
- 0
Re: taking apart an ak
matching #'s and milled. sorry
-
June 23rd, 2009, 06:04 PM #9Member
- Join Date
- May 2007
- Location
-
north east,
New Jersey
- Posts
- 71
- Rep Power
- 217
Re: taking apart an ak
milled get the weld up parts I think apex was getting them in
-
June 23rd, 2009, 06:20 PM #10
Re: taking apart an ak
Similar Threads
-
Taking the NFA + GCA seriously
By Fudmottin in forum GeneralReplies: 13Last Post: March 30th, 2009, 02:00 PM -
Taking my own 4473??
By vrocco in forum GeneralReplies: 1Last Post: January 8th, 2009, 02:59 PM -
Taking responsiblity
By MOUNTAINORACLE in forum GeneralReplies: 5Last Post: August 28th, 2008, 11:40 AM -
taking the 22-250 out today
By crowsnest2002 in forum GeneralReplies: 1Last Post: March 14th, 2007, 10:48 PM
Bookmarks