Results 1 to 6 of 6
Thread: WTS: Magpul Gear
-
May 15th, 2007, 04:58 PM #1
WTS: Magpul Gear
G&R Tactical is a proud Distributor for Magpul gear! Please contact us if you don't see something listed. sales@grtactical.com
C4
Magpul Products can be purchased here: http://www.gandrtactical.com/magpul.htm
PMAG $14.95 (non-window) QTY DISCOUNTS ARE AVAILABLE!
Precision Rifle Stock (PRS) $242
PRS Package Deal (includes A2 buffer, A2 Spring, A2 RE) $279
The Precision Rifle Stock is designed to be a field precision stock. Adjustable for both height and length of pull. At it's shortest LOP it is about the length of an A1 type Stock and extends about half and inch longer than an A2 stock.
Features billet machined buttplate, stainless steel shafts and Aluminum ball detent knobs. Body features removable end cap and integrated Picatinny rail mount.
Compact Type Restricted (CTR) Mil-Spec $97
CTR Rubber Buttpad $19.95
CTR Package Deal (includes CMT 6 Position RE, CMT H buffer, ISMI buffer Spring, CMT Castle Nut & CMT Receiver Plate $173
The CTR is designed to be a drop in replacement carbine stock body. Adjustable for length of pull. This stock features a unique locking mech that friction locks the stock to the buffer tube for zero movement.
Misson Adaptable AR15/M16 Grip Basic Kit (MIAD) $34
Misson Adaptable AR15/M16 Grip Ful Kit (MIAD) $44
MIAD Internal Core for two CR123A Batteries $16.95
The Magpul Mission Adaptable Grip(MIAD) is a drop in replacement for the pistol grip on the M16/M4/Ar15 series of rifles.
It features removable and replaceable front and rear panels for a custom fit over multiple hand sizes. Grip features improved ergonimics and positive rough texture on both sides and rear backstraps. Features a removable inner core that allows for storage (3 round plug included) Custom storage of batteries (waterproof) or bolt/firing pin is available with optional cores.
Full Kit includes 3 size backstraps (s,m,l), 4 frontstraps including integrated enhanced trigger guard, 3 round core plug, installation hardware.
XT Panels $11.95
Package Deal 4 for $43.02
Provides rubbery grip surface for improved weapon control.
Protects the operator from sharp rail edges.
Protects unmounted rail areas from damage.
Prevents damage to gear, such as rappelling ropes, that may be abraded or cut by uncovered rail sections.
Easily cut for custom fitting. Sections can mount next to each other to form a visually continuous cover.
Ladder Rail Protectors $11.95
Package Deal 4 ladders for $43.02
Provides a very low profile grip.
Protects the operator from sharp rail edges.
Protects unmounted rail areas from damage.
Prevents damage to gear, such as rappelling ropes, that may be abraded or cut by uncovered rail sections.
The Santoprene covers provide a rubbery surface for improved weapon control.
Easily cut for custom fitting. Each protector covers 17 slots of rail.
Magpul 5.56 NATO $3.32 (apiece)
Package Deal 10 for $29.88
When installed on the base of a rifle or subgun magazine, the Magpul provides unsurpassed speed and controllability during high stress, tactical magazine changes.
Durable thermoplastic loop with recessed rough gripping surface
Quick and easy installation and removal
Patended design based upon the tried and true para-cord loops and duct-tape tabs currently in use with special warfare units worldwide
Magpul L Floor Plate 5.56 NATO $6.65 (apiece)
Package Deal 10 L Plates for $59.85
The Magpul L Plate is a floorplate replacement for current issue USGI 30 round magazines that incorporates a rubberized pad.
Bumper pad is made of durable Santoprene overmolded onto a stainless steel plate.
Magpul Ranger Floor Plate 5.56 NATO $6.99
Package Deal 10 Ranger Plates for $65.99
The Magpul Ranger is a floorplate replacement for current issue USGI 30 round magazines that incorporates an integral loop, floorplate lock, and mag identifier. When installed on the base of a magazine, the Magpul Ranger provides unsurpassed speed and controllability during high stress, tactical magazine changes.
Loop made of pliable Santoprene overmolded onto a stainless steel plate
Patended design based upon the tried and true para-cord loops and duct-tape tabs currently in use with special warfare units worldwide.
Enhanced Self Leveling Follower Gen II 5.56 NATO $2.08 (apiece)
The Magpul Gen II Self Leveling Follower is a drop in replacement for the current issue USGI 30 round magazine follower.
Enhanced design features a patent pending 4-way anti-tilt design.
2% Teflon additive for self lubrication.
Magazine Rebuild Kit with Magpul GEN II Follower and ISMI CS Spring $11.50
ISMI springs are heat-treated and stress-relieved to improve performance and guranteed for 1 year!
Enhanced Trigger Guard M16/AR15 $18.95
The Enhanced Trigger Guard is a drop in replacement for the M16/AR15 weapons platform.
Features a shallow "V" shape for better use of gloves in tactical shooting or winter operations. The Enhanced Trigger Guard is non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard.
Speed Threader For PALS Web Gear
Patent Pending Threading device for PALS and Mollie webbing. Can thread a two strap pouch (interlaced correctly) in about 60 seconds.
Magpul T-Shirt
These T-Shirts feature a "roughed up" Magpul Logo printed in Red on a high end, tight knit, athletic cut shirt.
On the back in small roughed up text is "www.magpul.com" written in light gray across the shoulder blades.
Last edited by C4iGrant; June 16th, 2007 at 10:17 AM.
-
May 15th, 2007, 05:35 PM #2
Re: WTS Magpul Gear
Not to piss on your thread, but there are a lot of vendors offering lower prices and they include shipping. So why should I buy from you?
-
May 16th, 2007, 09:12 AM #3
Re: WTS Magpul Gear
No doubt there are cheaper dealers. We are not the low ball masters of the internet. We offer first hand knowledge on the gear we sell as use the gear in training which allows us to give honest feedback to you the consumer.
We also have a store front and keep hundreds of Magpul products in stock (not just one or two like most dealers on the internet).
C4
-
May 25th, 2007, 12:57 PM #4
Re: WTS: Magpul Gear
FDE, OD and Black PMAG's in stock and QTY discounts available!
C4
-
June 16th, 2007, 10:17 AM #5
-
August 17th, 2007, 02:59 PM #6
Re: WTS: Magpul Gear
Windowed PMAG's are in stock!
C4
Similar Threads
-
WTS: Magpul CTR Milspec Stock
By JSPA in forum GeneralReplies: 2Last Post: April 22nd, 2007, 11:57 PM -
My Fiance got her new CCW gear (56K murder).
By JustinM in forum GeneralReplies: 14Last Post: April 1st, 2007, 09:52 PM -
Gear Section?
By KeithPA in forum GeneralReplies: 2Last Post: February 27th, 2007, 12:02 PM -
Cool Gear Website
By DrakinClaw in forum GeneralReplies: 3Last Post: September 27th, 2006, 07:22 PM -
Magpul
By armabill in forum GeneralReplies: 9Last Post: May 15th, 2006, 10:56 AM
Bookmarks