Results 1 to 10 of 18
Thread: M&P 45 slide problem?
-
February 16th, 2009, 12:35 AM #1
M&P 45 slide problem?
Hey I've noticed that on my S&W M&P 45 that the slide gets stuck in the pulled back position like when after all the rounds are shot. I can get it back to the normal position by pulling back on the slide slightly and pushing the slide releae button down but can't just pop the slide back when pushing the slide release button.
It seems the groove is too sharp and may need to be filed down so I can just press the button to get the slide back to normal positioning.
I wanted to know if this is a defect or a problem? Before purchasing the M&P 45, I rented the M&P 9mm and I was able to just release the slide by pressing the button. Is there anyway I can get this fixed?
-
February 16th, 2009, 01:19 AM #2
-
February 16th, 2009, 01:28 AM #3
Re: M&P 45 slide problem?
I'd say its fairly new. I got it last April but I've only taken it to the range a few times.
-
February 16th, 2009, 01:40 AM #4
Re: M&P 45 slide problem?
so basically you're saying you're having a hard time getting the gun to go back into battery when using the slide release?
if that's the case, it's probably because it's still stiff...shooting the gun will loosen it up.
my M&P was tight, but not as tight as my XD...Peace, Prosperity, and Liberty
-
February 16th, 2009, 01:42 AM #5
Re: M&P 45 slide problem?
-
February 16th, 2009, 05:49 AM #6
-
February 16th, 2009, 10:53 AM #7
Re: M&P 45 slide problem?
I know this will probably start another argument, but S&W specifically calls it a Slide Stop - not a Slide Release. ...there is a design and usage difference.
And to back it up with the M&P's, they suggest a combination of the slingshot and pressing the down on the slide stop.
http://www.smith-wesson.com/wcsstore...tol_Manual.pdf
Bottom of page 16, even though its in reference to loading the gun. Still would apply for letting the slide back on empty chamber.
"Pull the slide to the rear, press down on the slide stop to release
the slide and allow it to carry fully forward."RIP: SFN, 1861, twoeggsup, Lambo, jamesjo, JayBell, 32 Magnum, Pro2A, mrwildroot, dregan, Frenchy, Fragger, ungawa, Mtn Jack, Grapeshot, R.W.J., PennsyPlinker, Statkowski, Deanimator, roland, aubie515, SteveWag
Don't end up in my signature!
-
February 17th, 2009, 03:03 PM #8
-
February 18th, 2009, 12:47 PM #9
Re: M&P 45 slide problem?
Mine was good right out of the box....
Yippie-Ky-Ay
-
February 18th, 2009, 01:36 PM #10
Similar Threads
-
Update: 1911 ejection problem. - Actually extraction problem.
By cobra2411 in forum GeneralReplies: 14Last Post: May 8th, 2016, 10:57 PM -
hk p30 or easy slide 9mm
By DeepbluePA in forum GeneralReplies: 2Last Post: January 16th, 2009, 07:57 PM -
1911 Slide Slide Stop, How to.....
By Wildturk in forum GeneralReplies: 4Last Post: April 6th, 2008, 08:02 PM -
Ruger P95 Slide
By thespider in forum GeneralReplies: 3Last Post: October 16th, 2007, 10:02 AM -
Little slide show
By Mentalcase in forum GeneralReplies: 2Last Post: April 17th, 2007, 06:35 PM
Bookmarks