Results 1 to 10 of 20
Thread: Primer seated sideways
-
January 13th, 2009, 02:10 PM #1
Primer seated sideways
Hi I've been reading these forums for a few weeks now, mostly the reloading section. A lot of good info and new stuff everyday. I just started priming a few shells today, and one of the primers went in sideways. Can I take it out with the resizing die and put a new one in, or should I just toss it?
-
January 13th, 2009, 02:13 PM #2
-
January 13th, 2009, 02:14 PM #3
Re: Primer seated sideways
Wear safety glasses.
"Never give up, never surrender!" Commander Peter Quincy Taggart
-
January 13th, 2009, 02:14 PM #4
Re: Primer seated sideways
Yes, you can use the die to remove it. Just make sure you are wearing eye protection if you are not already doing so.
-
January 13th, 2009, 02:49 PM #5
Re: Primer seated sideways
Alright, thank you.
-
January 13th, 2009, 06:02 PM #6
Re: Primer seated sideways
Don't forget hearing protection too!
-
January 13th, 2009, 06:10 PM #7
-
January 13th, 2009, 10:14 PM #8
Re: Primer seated sideways
...and no open containers of powder on the bench either!!!!
There are three kinds of people in this world....them what's good at math and them what ain't.
-
January 14th, 2009, 11:26 AM #9
-
January 14th, 2009, 12:49 PM #10Super Member
- Join Date
- Sep 2006
- Location
-
Pennsylvania
(Schuylkill County) - Posts
- 528
- Rep Power
- 226719
Re: Primer seated sideways
Are you people serious? A primer going off is nothing. I would not point it at my face but jesus.. its not like an out of battery explosion.
Run it through the sizer and be done with it... eye and hearing protection? Show me a picture of yourself reloading with eye and hearing protection.
Similar Threads
-
Remington Primer Question
By pghplr in forum GeneralReplies: 11Last Post: December 6th, 2009, 04:39 PM -
weak primer strike?
By JDePietro in forum GeneralReplies: 8Last Post: October 29th, 2008, 01:47 PM -
Primer tales
By manyplews in forum GeneralReplies: 4Last Post: May 9th, 2008, 03:30 PM -
Primer questions for reloading .357 mag
By Karys in forum GeneralReplies: 11Last Post: April 24th, 2008, 11:25 PM -
Dillon550 primer drawback
By CCinPA in forum GeneralReplies: 9Last Post: November 29th, 2006, 04:09 PM
Bookmarks