Results 11 to 18 of 18
Thread: Which Flintlock?
-
January 23rd, 2024, 06:45 PM #11
Re: Which Flintlock?
I had a T/C Hawkin .50 back in the mid ‘70’s. At that time there were only a few designated Game Lands where you could hunt in the late flint lock season. I liked that gun but sold it years later, along with many of my “hunting guns” , when I mostly gave up hunting to concentrate on fox trapping.
-
January 23rd, 2024, 07:02 PM #12Grand Member
- Join Date
- Aug 2014
- Location
-
Pittsburgh,
Pennsylvania
(Allegheny County) - Posts
- 1,092
- Rep Power
- 20694361
Re: Which Flintlock?
-
February 1st, 2024, 10:43 AM #13Junior Member
- Join Date
- Apr 2020
- Location
-
ETTERS,
Pennsylvania
- Posts
- 24
- Rep Power
- 0
Re: Which Flintlock?
The TC guns are hard to beat for the money. Renegades have less drop in the stock than their Hawken replicas. They also have heavier 1" barrels. Lyman are another option. Lots of folks like the Lyman Deerstalker for the 24" barrel. All of these have 1-48" twist rifling. Does OK with round ball or conicals.. I also have an old TC Hawken in .50 cal that gives me a 3" group at 100 yards. The Green Mountain barreled Renegade shoots a real tight group at 100 yards. Recoil gets heavy with the conical due to projectile weight.
Neither the .50 or the .54 is a great killer. They punch a hole through deer but the deer will run a bit before falling.
Some shoot the plastic sabots with 44 jhp bullets for better energy transfer but I find the sabots to not shoot as well for me and plastic residue in the barrel needs to be addressed.
-
February 1st, 2024, 01:23 PM #14
Re: Which Flintlock?
I went with a PA Pellet , I like the fact it has a removable breech plug , makes cleaning a lot easier. Accurate , inexpensive and fun to shoot.
As others have noted it's a 1:48 twist and mine likes the Hornady Great Plains bullet 385 grains much better than the sabots . I also tried patch and ball but the best accuracy I got was with the Hornady bullet.
flint.jpg
flint1.jpgFortuna audaces iuvat
"Who is John Galt?"
Deus Vult
-
February 1st, 2024, 04:09 PM #15
-
February 1st, 2024, 07:52 PM #16Grand Member
- Join Date
- Aug 2014
- Location
-
Pittsburgh,
Pennsylvania
(Allegheny County) - Posts
- 1,092
- Rep Power
- 20694361
Re: Which Flintlock?
Speaking from experience, when removing your barrel from the stock, pull straight out away from the tang. If you lift out at an angle (as you would with any other flintlock), you will bend and possibly crack the tang. Perhaps loosening the tang screws would help, can't confirm.
-
February 10th, 2024, 08:21 AM #17Super Member
- Join Date
- Jan 2010
- Location
-
Ephrata,
Pennsylvania
(Lancaster County) - Posts
- 647
- Rep Power
- 21474851
Re: Which Flintlock?
If authenticity matters, $500 won't get you far in the flintlock world. I know you are just looking for a hunting rifle that qualifies for the late season, but if you get the historical bug, you will find that $500 won't even buy a decent set of parts to assemble. The one exception to this is that you can occasionally find a Dixie Southern Mountain Rifle in this price range. They are good shooters and pass the smell test for authenticity.
-
March 30th, 2024, 09:44 AM #18Active Member
- Join Date
- Jun 2008
- Location
-
Westmoreland Co.,
Pennsylvania
(Westmoreland County) - Posts
- 223
- Rep Power
- 2154233
Re: Which Flintlock?
Good time to,search the local gun shops for trade in muzzleloaders. I started with a used T/C that was converted from cap to flint. Worked well and got me a doe or two. When I found a almost new Lyman deerstalker I jumped on it. I still use round balls and mostly shoot under 50 yards. My freezer is full, so it works.
Bookmarks