Results 1 to 5 of 5
Thread: SKS failure to extract
-
July 10th, 2020, 10:13 PM #1Junior Member
- Join Date
- Jan 2008
- Location
-
York County,
Pennsylvania
(York County) - Posts
- 4
- Rep Power
- 0
SKS failure to extract
I have a Yugo SKS with a failure to extract. I think this is a common gas issue. Looking for a recommendation on a gun shop that has done this sort of work in York County.
Once fixed, i plan to sell it.
Thanks,
-
July 10th, 2020, 10:24 PM #2
Re: SKS failure to extract
If it’s a 59/66 with the on/off gas valve for the grenade launcher then it’s an easy fix. Just buy a new replacement gas valve. I’ve bought quite a few “gun smith specials” over the years on the cheap which required a new clean oversized valve.
The rifle isn’t fully cycling due to a lack of gas. Just make sure your valve is currently set to semi auto and it’s not turned off which will make it into a single shot and you will have to manually cycle the bolt.
These are the best.
https://murraysguns.com/sks-gas-valves/Last edited by Hodgie; July 10th, 2020 at 10:27 PM.
-
January 26th, 2021, 08:35 PM #3Junior Member
- Join Date
- Jan 2021
- Location
-
Red Lion,
Pennsylvania
(York County) - Posts
- 4
- Rep Power
- 0
-
January 26th, 2021, 09:04 PM #4Junior Member
- Join Date
- Jan 2008
- Location
-
York County,
Pennsylvania
(York County) - Posts
- 4
- Rep Power
- 0
Re: SKS failure to extract
I do. It was fixed at the Carbon and Steel Sporting Goods store in West York, They fired a whole box of ammo through it and said it is good to go. They are selling it on consignment for me. 717 792 4667,
-
January 26th, 2021, 09:31 PM #5
Similar Threads
-
FMK 9C1 G2 - Failure to Extract
By Rblakely in forum PistolsReplies: 1Last Post: February 10th, 2020, 06:56 PM -
M&P PRO/Long Failure to Extract problems?
By reichebrown in forum GeneralReplies: 12Last Post: July 29th, 2011, 08:50 PM -
Glock 26 Failure to Extract
By JasonK007 in forum PistolsReplies: 42Last Post: June 16th, 2011, 08:48 PM -
Glock 26 -- failure to extract
By Rule10b5 in forum GeneralReplies: 12Last Post: August 17th, 2009, 05:45 PM -
Failure to extract.
By gunnerrun in forum GeneralReplies: 12Last Post: July 23rd, 2009, 10:57 PM
Bookmarks