-
Will this work ?
I have a Ruger 22/45. I had to send it back to the factory and they fixed all the problems. Now the only problem I have is the trigger pinches my finger and is no fun to shoot. No matter how I hold it I get the same results. I was wondering if I took my Dremmel and carefully ground off that sharp edge, will that help me ? I checked on replacement triggers and there around a hundred dollars plus a gunsmith charge. I admit these old hands don't like getting pinched. Anybody have any suggestions. Joe
-
Re: Will this work ?
Trigger shoe?
Volquartsen black replacement target trigger is $35.
https://forum.pafoa.org/showthread.php?t=390515
-
Re: Will this work ?
-
Re: Will this work ?
Quote:
Originally Posted by
joeyj
Whats a trigger shoe ?
It bolts on the trigger with hex screws, offering wider trigger contact with your finger.
https://www.gunpartscorp.com/pub/products/1607450.jpg
-
Re: Will this work ?
It*s hard to make the gun unsafe grinding on the external trigger surfaces. Go ahead and try it.
-
Re: Will this work ?
Try using sand paper on the sharp edges, round them. Use a small block of wood or dowel wrapped in the sand paper. I did an SP101 using that method. If I recall correctly, I used 220 grit. Go slow.
Rick
-
Re: Will this work ?
-
Re: Will this work ?
Quote:
Originally Posted by
bogey1
Day ja vu.
Deja vu indeed.