Need sling instal plan

**bripro** · December 2nd, 2010, 12:36 AM

I just changed out the butstock on this pump gun to the original which has a sling swivel stud. There is not one up front and I know I can loop a sling around the barrel but I dont see a good spot to do that. What are my options as far as installing a stud? Thanks, B

**streaker69** · December 2nd, 2010, 12:40 AM

I have one of these on my Winchester:

http://www.cheaperthandirt.com/SCP837-1.html

Then I attached the sling to this:

http://www.cheaperthandirt.com/ARR270-1.html

**SharpShooter88** · December 2nd, 2010, 12:43 AM

Get a tube cap and a swivle stud...that'll fix er right up for ya!

**RaisedByWolves** · December 2nd, 2010, 08:13 AM

The cap is a standard way to go, or you could also have the barrel lug drilled and tapped on the bottom like the 590.

**streaker69** · December 2nd, 2010, 08:42 AM

The reason I went the way I did was because I wanted a way to mount a light on the end. Mine does have a swivel but if I were to put the sling out there in combination with the light, the sling would block the light.

**orionz06** · December 2nd, 2010, 08:45 AM

http://www.gggaz.com/index.php?cat=172&parents=153

**bripro** · December 3rd, 2010, 11:44 PM

I just realized my mag cap is threaded. Now to find the stud.

**Fastball** · December 13th, 2010, 07:09 PM

Why not go with a single point sling for that lil' thing??

http://www.youtube.com/watch?v=CsY08eftJtM

**SharpShooter88** · December 13th, 2010, 11:34 PM

I was going to mention that myself. Or you could always modify a black mamba and make it a 2 point shotty sling...That would be tight fool!

SharpLikesthemambashooter