Results 1 to 3 of 3
-
May 10th, 2010, 03:42 PM #1
I KNOW these are out there...½" weaver riser
I know that these things are available, but the only ones that I seem to find are mil-spec $50-$60 pieces.
I need a riser for my weaver/picatinny rail that is about a half-inch high, and all I can seem to find are one inchers. (six inches long, roughly)
I simply want to co-witness my red-dot with my iron sites without having the dot sitting in the bottom of the sight; basically I want the dot to be centered in the housing so that I can look through the BUIS, through the red-dot, down the barrel and across the top of the front site, but see the whole sight-picture through the red-dot. Right now, they are co-witnessed, but I'm staring across the bottom of the scope."...a REPUBLIC, if you can keep it."
-
May 11th, 2010, 06:52 AM #2Junior Member
- Join Date
- May 2010
- Location
-
Elizabethtown,
Pennsylvania
(Lancaster County) - Posts
- 4
- Rep Power
- 0
Re: I KNOW these are out there...½" weaver riser
I have a Barska AR Riser Mount I bought off Amazon. I believe it was about $25. I measured the height at 11/16", not a 1/2", but it's closer.
-
May 11th, 2010, 07:35 PM #3
Re: I KNOW these are out there...½" weaver riser
I wasn't sure if you meant all you could find were 6" long, or what you wanted was a rise that was 6" long. Either way, Here's a 1/2" picatinny riser from burris. http://www.midwayusa.com/viewproduct...tnumber=439361 . If you go to midway and search for picatinny risers, you'll find plenty, some longer, and some not quite listing their height. Either way, I'm sure you might be able to find what you need there.
I also wanted to mention, you do know that Weaver and Picatinny mounts are slightly different right? They have slightly different dimensions.
Similar Threads
-
WTS: 4 sets of 1911 grips, Weaver AR-15 Riser
By BerksCountyDave in forum GeneralReplies: 0Last Post: December 2nd, 2008, 12:02 PM -
WTB/WTT Medium/High 1" scope rings, weaver mount
By Atomic Dog in forum GeneralReplies: 0Last Post: October 26th, 2008, 01:33 AM -
WTS: WEAVER 1" STEEL TUBE SCOPE
By lonewolf5347 in forum GeneralReplies: 1Last Post: May 29th, 2008, 06:22 AM -
3/4" Scope rings, Weaver base?
By ChamberedRound in forum GeneralReplies: 3Last Post: December 18th, 2007, 07:50 PM
Bookmarks