Results 1 to 6 of 6
Thread: Lets see that Molle Vest/ Gear!
-
April 25th, 2010, 11:49 PM #1
Lets see that Molle Vest/ Gear!
Picked up an Army issue Body Armor vest yesterday. The kevlar is long gone but Im having some steel plates cut and bent. I figure its better than nothing.
Anyway, I had been looking at 5.11 tactical vests but this came along first. Now I have all this Molle webbing and have no idea what types of Molle pouches to buy.
What do you guys have?
What workds for you?
Thanks!
Saved over the 5.11 vest. And it has the inserts for steel or kevlar plates. Cant beat that.Last edited by Zet70; April 26th, 2010 at 09:52 AM.
-
April 26th, 2010, 12:43 AM #2Member
- Join Date
- Apr 2009
- Location
-
Norristown,
Pennsylvania
(Montgomery County) - Posts
- 88
- Rep Power
- 33
Re: Lets see that Molle Vest/ Gear!
steel plates? not just buy some standard issued plates?
the interceptor vest, is it just outer liner or is the basic "second chance" material still inside?
-
April 26th, 2010, 03:54 AM #3
Re: Lets see that Molle Vest/ Gear!
Steel thick enough to stop anything is going to weigh a friggin ton. Thus the reason modern kevlar was invented.
Depending on how thin you go you could have an extra bad day if it's thin enough the bullet still makes it through. First it's going to spall the plate into you like a second bullet... PLUS the plate is going to make the bullet deform and expand... meaning you're going to end up with a 1/2" sized hole in you even if you take a 9mm to the chest. Minimum...
Whatever you put in there make sure it will stop pistol rounds. Like stop without spalling.
Or you're going to have a super bad day if you ever end up getting shot in it.
I second the option of buying drop in ceramic SAPI plates.
-
April 26th, 2010, 07:28 AM #4Active Member
- Join Date
- Dec 2009
- Location
-
Columbia,
South Carolina
- Posts
- 192
- Rep Power
- 308
Re: Lets see that Molle Vest/ Gear!
If the plate is angled and the spalling doesn't hurt you a round deflected down into your pelvis or thighs will take you out of the fight. Ceramic breaks and captures the bullet and the kevlar sheeting on the back of the plate keeps it intact.
-
April 26th, 2010, 01:37 PM #5
Re: Lets see that Molle Vest/ Gear!
Issued to me, now it just takes up space....
Mind if I ask why you have a vest like that?
-
April 26th, 2010, 02:34 PM #6
Re: Lets see that Molle Vest/ Gear!
Picked it up from a buddy for cheap. I was looking at Molle systems but they were all around $80 for the mil spec vests alone. So when he offered me this I picked it up.
Similar Threads
-
Building a Molle Vest
By riverpirate in forum GeneralReplies: 8Last Post: September 13th, 2009, 12:37 AM -
MOLLE Desert FLC Assault Vest & 2 Canteen Pouches New
By tyco_drone in forum GeneralReplies: 1Last Post: January 5th, 2009, 08:45 PM -
MOLLE Desert FLC Assault Vest & 2 Canteen Pouches New
By tyco_drone in forum GeneralReplies: 0Last Post: December 30th, 2008, 09:10 AM -
Rohdesian Molle Vest DCU $10?
By KeithPA in forum GeneralReplies: 0Last Post: December 3rd, 2006, 01:28 AM
Bookmarks