Results 1 to 5 of 5
-
March 13th, 2010, 07:39 PM #1
The Ruger SR 22 " This ain't your Pappy's plinker "
I just put on a Leapers 4x30 mil dot scope , some after market AR/M16 weaver rails for the hand guard, a UTG tacticool fore grip, a 25 round after market magazine, a 250 round speed loader ( very sweet )and I also picked up an NcStar open red dot sight just for shits n giggles. I know alot of you might think " why spend the money on something with no power or a "toy" " but I think my wallet will thank me in the end. I just wanted something fun to plink with that wasn't going to jam or fall apart on me when I am cranking 10k rounds this summer. I have only fired it once over the winter and I was only able to put 300 rounds through it before I started going hypothermic lol . Solid groups at 100 yards using Federal bulk from Wally world
I did a good bit of research on the available " tacticool " 22 plinkers before i made my final decision. I have heard of many receiver problems with the Colt that is actually made by Walther and it felt light and flimsy. I checked out the Smith and Wesson and found it to have more heft and better construction with an AR type tear down. Both were in the $500 - $550 range at all the shops I checked and online. I also saw a Sig Sauer for around the same price and it looked solid as well . Then I saw a video on Ruger's website for the SR22 and found one at a shop called Layman's in Wrightsville for $418. I was very impressed with the construction compared to the other models, and for 100 bucks less too. Only drawback is there are no " stock " iron sights but no matter, I was planning on mounting optics . So anyways let me know what ya'll think and I will update on the reliability when i get through the first 1k rounds.
One thing to mention the field strip/ tear down is a little excessive. 3 different tools needed A 1/4 hex, T15 torx , and a flat head .
-
March 15th, 2010, 10:30 AM #2
-
March 27th, 2010, 10:14 AM #3
Re: The Ruger SR 22 " This ain't your Pappy's plinker "
yes it is the tray hold 250 rounds of 22 lr and will load into any aftermarket 10/22 magazine
-
April 21st, 2010, 09:11 PM #4Junior Member
- Join Date
- Apr 2010
- Location
-
Waterford,
Michigan
- Posts
- 4
- Rep Power
- 0
The Ruger SR 22
What you think? it has a burris XTS 135 Xtreme tatical scope, Trimag, and rock mount Bipod
Josh's guns 2 007.jpg
Josh's guns 2 004.jpg
-
April 21st, 2010, 09:17 PM #5Junior Member
- Join Date
- Apr 2010
- Location
-
Waterford,
Michigan
- Posts
- 4
- Rep Power
- 0
The Ruger SR 22
And to dissemble it you do not have to take out the 4 screws, you can just pull it right out. one problem, one of my receiver pins is stuck how would you go about getting it to come out?
Similar Threads
-
Price check aisle VZ24; current "value" of a plinker VZ24?
By nfafan in forum GeneralReplies: 11Last Post: October 15th, 2009, 10:19 AM -
Ruger Standard Pistol "Liberty" Model
By hrc in forum GeneralReplies: 0Last Post: March 25th, 2009, 12:43 PM -
2001 Obama: "Tragedy" of Civil Rights Movement Failing to "Redistribution of Wealth"
By 5711-Marine in forum GeneralReplies: 2Last Post: October 27th, 2008, 09:36 AM -
WTT: Ruger 10/22 "WalMart Edition"
By WaltherP99 in forum GeneralReplies: 3Last Post: May 4th, 2008, 10:58 AM
Bookmarks