S&W 642 question

**lucas mccain** · March 9th, 2010, 03:29 PM

I have shot about 100 rounds out of my 642 and it's my first double action wheel gun. I am used to my 1911 and glock 36 trigger pull. The 642 has a heavy trigger pull at around 14 pounds. So my question is will a wolf spring kit from midway usa fix the heavy trigger pull? Does anyone recommend something else? Should just keep practicing with the way it is and deal with it? Below is a link to said spring kit. Thanks!

http://www.midwayusa.com/viewProduct...tNumber=375177

**lucas mccain** · March 9th, 2010, 03:34 PM

well after doing more search on the forums here i found some answers. I still want to know if any one has tried out the springs.

**IronButt** · March 10th, 2010, 01:21 AM

If you get the spring kit let me know how it works out & how hard the installation was. I was thinking of looking for a good local smith who could do a trigger job on my wife's 642. If I could lighten it up myself for $10 that'd be great.

**ar15jules** · March 10th, 2010, 08:34 AM

Learn to "stack" it and you should be fine.
Jules

**cdi** · March 10th, 2010, 09:39 AM

Wolff springs are top quality. I use them in trigger and action work on S&W revolvers frequently.

After action work and Wolff springs a typical 640 will have a double action pull weight in the 8 to 9 lb range.

Another plus is they are a very reliable local company. They're in Newtown Pa.

**shiloh** · March 10th, 2010, 09:49 AM

If you're comfortable working on revolver actions I'd say go for it, but if you're new to wheelguns you might want to let a gunsmith do it instead. Is the problem just with the weight of the pull in double action, or is it that the pull is inconsistent (for example, you feel some hitch or hesitation, or bad grittiness, and have to increase trigger pull to get the trigger to break)? If the former, then the Wolff springs should help. If it's the latter, the revolver might benefit from a more complete action job. I'd use a gunsmith for that kind of work.

**Rundownfid** · March 10th, 2010, 10:33 AM

The Wolfe springs are very good, and yes the Wolfe company is local and the owner is a shooter and all around good guy.

Having said that there is a lot to be said for doing nothing but lubing and shooting the original gun. You need to learn to stack the shot, i.e. slowly pull the trigger until the cylinder has rotated and there should be a pause where a small additional pressure will release the sear and fire the round. With practice this can be done fast and consistently. As you practice this (in a dry fire mode), you will achieve 3 things. Your finger will strengthen and the pull will seem lighter. The pull will get lighter as the various parts smooth each other off. You will accustom yourself to feeling the various stages of pull and muscle memory will build so that you can reliably stack the pull and get a good sighted shot.

All of the above is not helped by weaker springs. Although the Wolfe springs are excellent there can be function problems with less than factory pressures. Take the trigger return spring for example. This spring pushes the trigger back to reset, and it has to be compressed to fire the round. Lightening it does decrease the pull necessary to fire, however it also slows the return to reset. If you are shooting really fast there is a potential problem as your revolver won't reset immediately. So what you gain in one area is lost in another.

Smith and Wesson has been making side ejector revolvers for some time now and have a pretty good handle on what spring pressures are best. I would recommend stock springs and a good action smoothing by a competent smith. If the money is too much then just lube and cycle the action, it will smooth itself eventually.

Congratulations you have an excellent revolver.