Results 1 to 2 of 2
Thread: Taurus revolver barrel
-
February 27th, 2010, 08:25 PM #1
Taurus revolver barrel
I have a Taurus revolver, large frame. I want to know if anyone knows if I can get a new barrel from Taurus and change them. How hard of a process is this. Is it just a matter of unscrewing the old and screwing on the new till its tight? I just got done swapping receivers on my AR. From an A2 style to a new, stripped A3/M4 style. I have some skills. I don't want to send it to the factory or some other guy and pay them. If I have problems with function then I send stuff to a pro but...
Mo’lon la’ve
-
March 3rd, 2010, 03:24 PM #2Super Member
- Join Date
- Aug 2006
- Location
-
Pittsburgh,
Pennsylvania
(Allegheny County) - Posts
- 898
- Rep Power
- 1265929
Re: Taurus revolver barrel
There is a bit more to it than screwing a barrel on and off. The barrel shoulder has to be faced with a lathe so that the barrel is torqued properly at the point where the front sight is in proper alignment. Also the barrel to cylinder gap has to be set properly once the barrel is installed correctly.
The Lord Bless You
Similar Threads
-
Taurus 905 revolver
By tdyoung58 in forum GeneralReplies: 15Last Post: August 10th, 2009, 11:03 PM -
Taurus 410 revolver
By cptdwcat2005 in forum GeneralReplies: 1Last Post: February 28th, 2009, 09:30 PM -
Taurus or S&W 45 ACP revolver
By 65mustang in forum GeneralReplies: 0Last Post: February 14th, 2009, 01:22 PM -
taurus 66 revolver .357 mag
By axp117crow in forum GeneralReplies: 0Last Post: December 6th, 2008, 09:39 PM
Bookmarks