Results 1 to 10 of 12
Thread: cc holster for sw9ve
-
February 26th, 2010, 06:04 PM #1Junior Member
- Join Date
- Feb 2010
- Location
-
Bar Harbor,
Maine
- Posts
- 7
- Rep Power
- 0
cc holster for sw9ve
Hi All,
I'm new to this forum so thanks in advance for input. I just purchased a used SW9ve from a local gun shop and I'm looking for good concealed holster. I like the paddle design, does anyone know of one that fits the SW9VE? Any other suggestions?? Thanks again.
jrm
-
February 27th, 2010, 04:33 PM #2
Re: cc holster for sw9ve
Jim,
Welcome to the PAFOA forum! I have a SW40VE. The holster I use is a Fobus Paddle Holster. <~~~ Click that. That is the model I use. (I also have one for my LCP & had one for my XD before I sold that). It's extremely comfortable, very lightweight, very durable, has a lifetime warranty and costs less then $30. Can't beat that in my opinion. Hope that helps. Good luck.
- iMoses
-
February 27th, 2010, 04:43 PM #3
Re: cc holster for sw9ve
get the Blackhawk SERPA for the Glock 21; it fits the Sigma perfectly. it's what i used. the Fobus has no retention, and will eventually loosen up, and your gun WILL fall out. i speak from experience. you'd be better off with a cheap Uncle Mike's than a Fobus.
you might also want to try other options, like IWB or OWB pancake or Yaqui holsters. Bianchi makes one, the Minimalist, that fits the Sigma nicely. the Blackhawk doesn't conceal too well, mostly because of the thivkness of the gun's grip.
-
February 27th, 2010, 05:08 PM #4
Re: cc holster for sw9ve
have a SW40VE, I use bianchi Minimalist (very nice,fits well)http://www.bianchi-intl.com/product/...delID=105,also have a DeSantis tuck this, IWB(conceals very well) http://www.desantisholster.com/store...&ctg_id=121404 Just got a DeSantis Thumb break scabbard(Very Nice!! My favorite http://www.desantisholster.com/store...se&ctg_id=3688
-
February 27th, 2010, 05:38 PM #5
Re: cc holster for sw9ve
Blackhawk sepra - glock 21
Bladtech/5.11 - glock 21
-
February 27th, 2010, 05:43 PM #6
-
February 27th, 2010, 09:19 PM #7
Re: cc holster for sw9ve
Fobus Evolution Paddle Holster. That holster has a retention screw. And, it's still under $30. I stand by Fobus. I wouldn't own any other holster.
- iMoses
-
February 27th, 2010, 11:44 PM #8
Re: cc holster for sw9ve
the Fobus has a retention screw, that loosens up over time. eventually, i had to use Gorilla tape to tighten the holster. the Blackhawk SERPA has a retention screw, plus a trigger lock, that doesn't loosen over time. my first paddle holster was a Fobus; it was a waste of money. i've learned that, like anything else, good products are not cheap, and cheap items are not good. the SERPA is only a bit over $30, not mush more expensive than the Fobus, but miles better.
-
February 28th, 2010, 01:42 PM #9Junior Member
- Join Date
- Feb 2010
- Location
-
Bar Harbor,
Maine
- Posts
- 7
- Rep Power
- 0
Re: cc holster for sw9ve
Thanx for all your input, it's very helpful. I'd like your thoughts and input on the "Yaqui" style and the "roto" styles if you don't mind. Thanx again
JRM
-
March 1st, 2010, 09:42 PM #10Junior Member
- Join Date
- Feb 2010
- Location
-
Bar Harbor,
Maine
- Posts
- 7
- Rep Power
- 0
Similar Threads
-
S&W SW9VE
By doof197456 in forum GeneralReplies: 2Last Post: October 14th, 2009, 07:59 PM -
S&W Sigma SW9VE 9mm with 4 hi cap mags, holster
By bigdog02 in forum GeneralReplies: 2Last Post: September 26th, 2009, 10:07 PM -
S&W SW9VE w/ Pro Trigger Job
By PA1749 in forum GeneralReplies: 1Last Post: August 31st, 2009, 05:32 PM -
SW9VE Magazine
By middleriggle in forum GeneralReplies: 0Last Post: August 5th, 2009, 09:00 PM
Bookmarks