Results 1 to 8 of 8
Thread: Help - I need rings for my 10/22
-
January 23rd, 2010, 10:40 PM #1Senior Member
- Join Date
- Apr 2009
- Location
-
Philadelphia,
Pennsylvania
(Philadelphia County) - Posts
- 389
- Rep Power
- 999
Help - I need rings for my 10/22
I just bought an inexpensive scope for my stock 10/22.
It's a Simmons 4x32 like this:
http://tinyurl.com/scope1022
It didn't come with rings and now I need some advice.
I look on Midway's website and see 4 different heights in the 1" Weaver rings category.
How do I know which height I will need?
Can rings "cowitness" the irons?
Will an inexpensive set be complete garbage, as the .22lr isn't going to beat them up with recoil?
This is just an example of a "low" set of rings.
Would this be fine for my purposes?
http://tinyurl.com/leupoldrings
-
January 24th, 2010, 12:04 AM #2
Re: Help - I need rings for my 10/22
I bought the rings for my 10/22 at Walmart. Go cheap unless you plan on using it for competitive shooting.
Μολὼν λάβε
-
January 24th, 2010, 01:19 PM #3
Re: Help - I need rings for my 10/22
Being able to still use the irons is more about finding either a rail that bolts to the reciever and has a groove there specifically for the purpose, or a set of rings that bolts directly to the receiver and holds the scope a hair high.
The stock rail wont work for your purposes no matter what.
-
January 24th, 2010, 02:06 PM #4
Re: Help - I need rings for my 10/22
The rings I have are see through.
Μολὼν λάβε
-
January 24th, 2010, 02:37 PM #5
-
January 26th, 2010, 10:55 AM #6
Re: Help - I need rings for my 10/22
Wal-Mart sells both bases and see thru rings here for 10/22's
Honesta Mors Turpi Vita Potior ~ 3%
-
February 5th, 2010, 09:23 PM #7Grand Member
- Join Date
- Jun 2009
- Location
-
Newport,
Pennsylvania
(Perry County) - Posts
- 1,111
- Rep Power
- 17141
Re: Help - I need rings for my 10/22
You show Weaver style rings, but what you want are the .22 dovetail type. As mentioned above Wally World sells these cheaply. Just look for .22 dovetail compatible, low may work, but you might prefer med. height your scope has a 32 mm objective bell, the rings may mention what bell sizes they can generally support.
You would be safe with .22 dovetail rings in a med height for a 1" scope. No need to go to a gun shop unless you want the security of professional advice, if not Wal-Mart is quick and cheep.
-
February 5th, 2010, 10:16 PM #8
Similar Threads
-
Tiffany & Co Rings (2) - Like NEW!
By keystoneman 85 in forum GeneralReplies: 7Last Post: July 9th, 2009, 04:07 PM -
Scopes and Rings
By RJH245 in forum GeneralReplies: 2Last Post: April 14th, 2009, 07:31 AM -
Which rings for a RRA Varmint EOP?
By LordJim in forum GeneralReplies: 3Last Post: August 12th, 2008, 12:20 AM -
Rings For M1A
By K31 in forum GeneralReplies: 0Last Post: May 6th, 2008, 09:09 PM -
need red-dot to fit in 1in schope rings.
By DrakinClaw in forum GeneralReplies: 6Last Post: May 24th, 2007, 07:39 PM
Bookmarks