Results 1 to 10 of 22
Thread: new mainspring won't fit 1911
-
January 22nd, 2010, 07:15 PM #1
new mainspring won't fit 1911
Hi guys, I purchased a fusion mainspring housing for my 1911 pistol. the holes in the frame are just off by a hair with the mainspring housing. I know I need to get a small round file of some sort, but do I remove from the housing or the frame to get the pin to go through? any tips would be appreciated
-
January 22nd, 2010, 07:19 PM #2Banned
- Join Date
- Jul 2008
- Location
-
Warminster,
Pennsylvania
(Bucks County) - Posts
- 826
- Rep Power
- 0
Re: new mainspring won't fit 1911
And you call yourself an Auto Tech. Find a BFH tool and hit that sucker. If it goes, great! If it doesn't go, hit it harder. If it breaks, it needed replacin' anyhow.
And don't go hittin' it like a little girl. Hit it like you married it!
Kidding!!!
-
January 22nd, 2010, 07:22 PM #3
Re: new mainspring won't fit 1911
I'd do on the main spring housing, there's nothing wrong with the frame.
-
January 22nd, 2010, 07:45 PM #4
Re: new mainspring won't fit 1911
You sure you got the right one? A full size MS housing won't fit a compact.
If the MS housing is too low.....won't insert the whole way.....you file the top of the MS housing.
You don't mess with the holes......
LycanatleastIdon'tthrope
I taught Chuck Norris to bump-fire.
-
January 22nd, 2010, 08:52 PM #5
Re: new mainspring won't fit 1911
I'm sure i've got the right housing. I've got the housing in the whole way and the hole in the frame is off to one side just the tiniest bit. I think I'm going to file the frame just a bit. it looks like to me that the mainspring pin has an indent that retains the pin by the housing and not souly on the tight fit of the pin in the hole. This is on a Firestorm produced by metroarms so it's not a show piece by any means. i just want to get the mainspring to fit because of the added magwell. now, where could I find a file small enough to fit in the pin hole?
-
January 22nd, 2010, 09:26 PM #6
Re: new mainspring won't fit 1911
Any Sears store will have needle files.
-
January 22nd, 2010, 09:27 PM #7
Re: new mainspring won't fit 1911
Look for files called jewelers or swiss files. Come in a variety of shapes and sizes.
Ron USAF Ret E-8 FFL01/SOT3 NRA Benefactor Member
-
January 22nd, 2010, 11:06 PM #8
-
January 23rd, 2010, 12:20 AM #9
Re: new mainspring won't fit 1911
General rule for gun part modification: Carve on the one that doesn't have a serial number.
-
January 23rd, 2010, 01:51 AM #10Banned
- Join Date
- Nov 2009
- Location
-
Barsoom,
Pennsylvania
(Allegheny County) - Posts
- 1,270
- Rep Power
- 0
Re: new mainspring won't fit 1911
No, no, no, no, no . . . .
To paraphrase imashooter2, avoid modifying parts that can't be easily replaced.
Sure it's not a show gun but when you decide to try a different housing, maybe it won't line up perfectly either so are you going to grind away more of the frame.
Similar Threads
-
Thoughts On The Springfield Armory 1911 Operator? Purchasing My First 1911.
By Nickname Tactical in forum PistolsReplies: 4Last Post: January 19th, 2010, 11:12 AM -
Changed mainspring on K frame anyone have a tutoral on rebound spring?
By thelemite in forum GeneralReplies: 9Last Post: December 22nd, 2009, 08:49 PM -
Taurus PT-1911 Mainspring Housing Stuck
By amcoder in forum GeneralReplies: 3Last Post: September 5th, 2009, 06:28 PM -
Is colt 1911 worth trading my Para 1911?
By Mity2 in forum GeneralReplies: 48Last Post: December 9th, 2008, 01:56 PM -
Flat/Blued/Checkered Mainspring Housing for 1911.
By AFARR in forum GeneralReplies: 0Last Post: October 1st, 2007, 01:48 PM
Bookmarks