Masterkey shotgun with a longer barrel

[masakarijoe]

is it possible to buy a KAC masterkey shotgun (mounted to the barrel of an AR in a similar fashion to an M203) with a longer barrel and magazine tube so that i dont need any special liscense/permit for it?
thanks guys
-Joe

[bleaman225]

is it possible to buy a KAC masterkey shotgun (mounted to the barrel of an AR in a similar fashion to an M203) with a longer barrel and magazine tube so that i dont need any special liscense/permit for it?
thanks guys
-Joe

That's an awful lot of shotgun hangin off you AR...

[masakarijoe]

yeah, well... its an awful lot of AR
im just considering it for sometime a few years down the road. i dont even have an AR right now, and the one that i plan on buying wouldnt be compatible with this anyway. so its a while from being made.
-Joe

[XD45]

yeah, well... its an awful lot of AR
im just considering it for sometime a few years down the road. i dont even have an AR right now, and the one that i plan on buying wouldnt be compatible with this anyway. so its a while from being made.
-Joe

IIRC the minimum OAL for shotguns is 26", with 18" minimum barrel length so being as impractical as that'd be I doubt they make one from the factory. I guess legally you could do one up yourself though.

[justashooter]

who needs 6-8 shots? take an old double like a stevens 335, cut the barrels to 18+, remove the buttstock, and fashion a pistol grip to fire from. if it's connected to the rifle by screws that require a tool to remove it meets the 26" rule, and would be 6-8 inches shorter than a pump gun.

[masakarijoe]

thats not what im looking to do. i want to make a masterkey (remmington 870 modified by KAC) for a 20" AR15.
-Joe

[Asmodeus6]

It's still going to be a SBS of some variety to fit under an AR 15. And / or, it's going to weigh like as much as an SUV and stick out like 6-8" from the front.

If you had a "slightly longer" and more matched to a 20" barreled AR masterkey, it would still be a very short barrel on the 870 to stay under the gun. Because of the 870's receiver.

Trust me I have an 870 and an AR 15 here I look at with that thought at least once a week. And if there wasn't so many other things I wanted first. I would have made an attempt to make one. Except I'm sure KAC wants like 3x whatever they should actually cost.

[masakarijoe]

yeah, it figures. well maybe ill look into it someday, but ill shelve it until i can just get it to be an SBS.
the KAC one is $3500 i think.
-Joe