Results 1 to 9 of 9
Thread: WD-40 as a gun cleaning tool
-
August 13th, 2007, 10:31 PM #1Senior Member
- Join Date
- Apr 2007
- Location
-
Philadelphia,
Pennsylvania
(Philadelphia County) - Age
- 50
- Posts
- 362
- Rep Power
- 186
WD-40 as a gun cleaning tool
Allright, let's hear it: A buddy of mine uses WD-40 as part of his weapons cleaning routine. He likes that it penetrates the bolt group and other hard to reach spaces. I like it too.....but I don't know if it is a good idea.
So what do you all think? Is WD-40 a good way to lube a hard-to-reach area or is it a real bad idea????NEED should never enter into a discussion about RIGHTS
-
August 13th, 2007, 10:58 PM #2
Re: WD-40 as a gun cleaning tool
My wife's uncle uses it to clean any metal parts on his guns. He says not to use it as a lubricant though. It evaporates. He says to clean the gun. Let it sit an hour or 2, then reassemble and lube as required.
Μολὼν λάβε
-
August 14th, 2007, 01:06 AM #3
Re: WD-40 as a gun cleaning tool
WD40 is a Penetrating oil, not a gun oil.
http://en.wikipedia.org/wiki/Penetrating_oil <-- penetrating oil
http://en.wikipedia.org/wiki/WD-40 <-- WD40
While it seems to initally work well, as previously stated it will evaporate though not completely, it will leave a film which can become sticky. if you use WD40 to help you clean up you still need some Lube in there. WD40 is handy if you are shooting corrosive ammunition and you have to use HOT water to flush out the gun, use WD40 after it to eliminate as much H20 as possible then Lube away!
I use a CLP (clean, lubricate, protect on some of my guns, others get the straight lubricating oil.
http://www.triplebreakproducts.com/B.../breakfree.htm
YMMV but I would not use the WD40 unless I had to (corrosive ammunition)
Cheers,
josh
"132 and Bush I've got him at gun point, OK gun point, 132 and bush, cover is code 3"
[SIGPIC][/SIGPIC]
-
August 14th, 2007, 07:37 AM #4Super Member
- Join Date
- Mar 2006
- Location
-
Philly area,
Pennsylvania
(Chester County) - Posts
- 713
- Rep Power
- 1177773
Re: WD-40 as a gun cleaning tool
I use WD40 for about 20 years on my guns have no problem. I do lube after I clean and I do use hoppes as well. I use it to flush out dirty actions. I do dry it. It can leave a film and some people say it gets gummy. I have not had this issue. Maybe cause I am drying it.
ETA people on ARFCOM use break claener to clean their AR 15. They say it gets the carbon out. If a gummy residue builds up from WD40 I would imagine the break cleaner can clean it and you can start over.Last edited by Lougotzz; August 14th, 2007 at 07:40 AM.
-
August 14th, 2007, 09:11 AM #5
Re: WD-40 as a gun cleaning tool
WD40 is a water displacement formula. There is a history that shows how the inventors got to formula #40 (thus WD40). Its great for silencing squeeky hinges, etc. and I have known several people that have never used anything else to lube their guns. I would not. Do I have some at home, yes, but I use it for stuff around the house, not on my guns. If I need to break a bolt or nut loose there are better products for that endeavor. There are a lot of better products geared strickly to firearm cleaning and lubrication. Yes, brake cleaner works great on AR's. Works on other stuff also but be careful around synthetic stocks, it could blemish them.
Gun cleaning materials are getting very specialized. You can get stuff just to remove the copper fouling in the bore, you can get stuff just to clean the lead from the bore and revolver chambers, you can get stuff just to clean carbon from AR's. IMO the days of JUST using Hoppe's #9 is over (although I still use it to finish cleaning after using the specialized stuff).Ron USAF Ret E-8 FFL01/SOT3 NRA Benefactor Member
-
August 14th, 2007, 02:54 PM #6
Re: WD-40 as a gun cleaning tool
i agree, i CLEAN w/ wd40, but i oil w/ clp brfoer i re-assemble.
prob not as good as the other comercial bore cleaners, but its cheap and usualy handy.
-
August 14th, 2007, 06:15 PM #7Grand Member
- Join Date
- Aug 2006
- Location
-
Nowhere Land,
Pennsylvania
(Westmoreland County) - Posts
- 4,954
- Rep Power
- 5723755
Re: WD-40 as a gun cleaning tool
CLP is probably the best general purpose cleaner, lubricant and protectant.
Slip 2000 has been very well received in many circles.
http://www.slip2000.com/home.html
There are better products on the market today.
-
August 15th, 2007, 12:02 PM #8
Re: WD-40 as a gun cleaning tool
If you must use WD-40, here are two things to keep in mind:
1) After using it to clean, wipe the excess away and use a real gun lube,
2) That sticky stuff that can be left behind is actually caused by the chemicals used in the spray can; if you can get it in a bottle (sometimes you can find a gallon tub) or pump/trigger spray bottle, you can avoid those chemicals.
Or... just avoid it all together and use Gunzilla.- May the forCZe be with you.
-
August 15th, 2007, 01:45 PM #9
Re: WD-40 as a gun cleaning tool
I'll use WD-40 first if moisture is an issue or for a quick wipe to hold me over until I can do a proper cleaning. I prefer Remoil or BreakfreeCLP for guns, penetrating oil (Kroil) for loosening rusted or seized parts and lubricant specifically designed for a particular application for lubrication applications. WD-40 is OK for a quick fill-in for all around use, but it isn't what I go for when I have a specific task that I want to do properly.
I ain't against it, but it isn't my preference in most cases.
That's my 2¢.
Similar Threads
-
Anyone got a Sig sight tool for the metal famed Sigs?
By jdlv4_0 in forum GeneralReplies: 3Last Post: June 13th, 2007, 03:19 PM -
WTS: 1911 grips, Swedish front sight adjuster tool, Swede 6.5x55 ammo
By Junior in forum GeneralReplies: 0Last Post: June 9th, 2007, 05:48 PM -
WTS: AR15 red dot scope and armor's tool
By luckyned7 in forum GeneralReplies: 8Last Post: April 29th, 2007, 12:58 AM -
WTS: Mini 14 Rear Sight Tool
By Lambo in forum GeneralReplies: 1Last Post: March 5th, 2007, 12:09 AM -
AR Cleaning Kit?
By Lambo in forum GeneralReplies: 0Last Post: February 24th, 2007, 06:29 PM
Bookmarks