Results 1 to 10 of 39
Thread: Stuck Bore Snake
Hybrid View
-
January 5th, 2010, 01:33 AM #1Junior Member
- Join Date
- Nov 2009
- Location
-
Levittown,
Pennsylvania
(Bucks County) - Posts
- 17
- Rep Power
- 0
Stuck Bore Snake
This is embarrassing but here it goes. I fired a few rounds from my new Ruger SR-556 today. I passed a bore snake through it 4 times with no problem. After the 4th pass, a bit of thread from the inside came out so I tied a knot around the snake and snipped off the excess. On the 5th and final pass, the snake got stuck in the barrel. I mean really stuck.
The end of the bore snake is about an inch past the chamber. The rope and first 14" or so of the snake are out of the muzzle.
Help!
-
January 5th, 2010, 01:47 AM #2
Re: Stuck Bore Snake
You don't have a cleaning rod to push it out with?
Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy.
-
January 5th, 2010, 02:09 AM #3
-
January 5th, 2010, 02:19 AM #4Member
- Join Date
- Jan 2010
- Location
-
bellefonte,
Pennsylvania
- Posts
- 92
- Rep Power
- 15
Re: Stuck Bore Snake
i just bought one for my ar but havent used it yet. i'll have to remember not to tye it off. im wondering if a push rod would work tho because of the way its woven it seems like it may bunch up when you hit it with the rod instead of pushing out.
-
January 5th, 2010, 02:58 AM #5Junior Member
- Join Date
- Nov 2009
- Location
-
Levittown,
Pennsylvania
(Bucks County) - Posts
- 17
- Rep Power
- 0
Re: Stuck Bore Snake
I've got a rod, but i like going through the bore a few times with a dry bore snake before using the rod to push a solvent soaked pad or 2 down the bore. I tried pushing it out with the rod but the plastic jag started to bend. And I've pulled pretty hard on the string to no avail so i don't think i can push it through. I think I'm going to have to find a way to pull it back through the chamber.
-
January 5th, 2010, 03:10 AM #6Member
- Join Date
- Jan 2010
- Location
-
bellefonte,
Pennsylvania
- Posts
- 92
- Rep Power
- 15
Re: Stuck Bore Snake
maybe try bending a fishing hook straight but leave the barb on the end and tape it to a thin peice of plastic or a wooden dowel and try to stab the barb into the snake to get it caught in the snake and pull it out backwards? just make sure the hook is on tight so it doesnt come off and get lodged in the barrel also.
-
August 5th, 2012, 08:00 PM #7Junior Member
- Join Date
- Jan 2012
- Location
-
winterville,
Ohio
- Posts
- 29
- Rep Power
- 0
Similar Threads
-
Fiocchi 45 ACP, 38 SP, Buffalo Bore 9mm +P, Blazer Brass 9mm, Buffalo Bore 380 +P
By tobor in forum GeneralReplies: 0Last Post: September 28th, 2009, 12:49 PM -
Shooting a snake
By mickey01023 in forum GeneralReplies: 109Last Post: August 9th, 2009, 05:24 PM -
SNAKE, Need help identifying
By renegadephoenix in forum GeneralReplies: 34Last Post: July 7th, 2009, 04:23 PM -
Snake Charmer
By normanvin in forum GeneralReplies: 13Last Post: June 12th, 2009, 01:04 AM -
Smooth Bore slugs vs Rifled Bore slugs?
By Djnardu in forum GeneralReplies: 8Last Post: February 24th, 2009, 06:18 PM
Bookmarks