Ok when I first got my P-22 I shot about 200 rds through it w/o the suppressor on it. With the sight that came installed on the front (tallest one) at about 30ft it was hitting about 3-4" high but it was very consistant using rem. golden bullets. I put the suppressor on using either CCI standard velocity or rem. sub-sonics it shot exactly the same having about 200rds through it. I went out wednesday and shot it w/o the suppressor and now its hitting about 3-4" low not high anymore, I put the suppressor back on and its shooting normal 3-4" high. I went to an indoor range where It was a controlled environment, not sitting on a block shooting a steel target and its still shooting funny. Its like the gun had a reset button and I pushed it on accident. If anything I thought it would be hitting high with the higher velocity ammo but its actually doing the opposite. Has anybody else had this happen to them with a suppressor? What could be the problem?