Results 1 to 10 of 12
Thread: MAC10 QUESTION
-
October 26th, 2009, 04:15 PM #1
MAC10 QUESTION
is the spent brass supposed to be bulged on one side? i called the guy who worked on my mac and he says its normal, i never heard of anything like this any input?
FJB
-
October 26th, 2009, 04:30 PM #2Grand Member
- Join Date
- Sep 2007
- Location
-
Effort,
Pennsylvania
(Monroe County) - Posts
- 2,262
- Rep Power
- 3681644
Re: MAC10 QUESTION
MAC MGs are blow back guns so most likely it will bulge the brass out when fired.
-
October 26th, 2009, 04:55 PM #3
Re: MAC10 QUESTION
Sign up for uzitalk.com and post on the MAC forum. They probably only have 50 people there on a regular basis but that includes manufacturers, dealers, people who knew Ingram, and people that bought their first MACs for $25 when RPB shut down.
I shoot M11/9 and never noticed a bulge in the brass.
-
October 26th, 2009, 05:50 PM #4
Re: MAC10 QUESTION
The MAC-10 I rented at a range in Tampa would bulge cases. I cant say everyone of them does it though.
RIP: SFN, 1861, twoeggsup, Lambo, jamesjo, JayBell, 32 Magnum, Pro2A, mrwildroot, dregan, Frenchy, Fragger, ungawa, Mtn Jack, Grapeshot, R.W.J., PennsyPlinker, Statkowski, Deanimator, roland, aubie515
Don't end up in my signature!
-
October 26th, 2009, 06:57 PM #5
-
October 26th, 2009, 07:49 PM #6
Re: MAC10 QUESTION
yes:
45acp
You could get a new barrel cut w/ an in "spec" chamber if you wanted, it;s been done before.No, not billet martini glasses... Baffles.... EVIL Baffles
-
October 26th, 2009, 09:12 PM #7
-
December 2nd, 2009, 03:29 AM #8Member
- Join Date
- Aug 2009
- Location
-
Natrona Heights,
Pennsylvania
(Allegheny County) - Posts
- 39
- Rep Power
- 0
Re: MAC10 QUESTION
I have a M11/9 that does the same thing. I dont even bother reloading them after they come outta her. I would shoot Wolf but she jams
-
December 3rd, 2009, 06:14 PM #9
Re: MAC10 QUESTION
I'll never shoot wolf again. I had my first squib encounter over the weekend. I was shooting Wolf 115gr ammo in my Mac 10 and pop and the gun jammed. I think it was the first round off the mag.So I packed up and went home to try to remove it. I wouldn't have giving a dam but it was in my custom made barrel that I had made for AWC MK9 suppressor for my UZI. I guess I got lucky because I put a small long drill bit down the front of the barrel and taped it out with a hammer. It happened in the thickest part of the barrel were it threads into the upper so I diden't see any damage to the barrel. So needles to say I'm done with wolf aammo. By the way that was the first time I tried wolf ammo........and the last.
Mike
-
December 3rd, 2009, 10:50 PM #10
Similar Threads
-
Ingram MAC10 45acp
By Greguw in forum GeneralReplies: 2Last Post: January 2nd, 2013, 09:19 PM -
Ingram Mac10 9mm
By Greguw in forum GeneralReplies: 0Last Post: March 19th, 2009, 09:23 AM
Bookmarks