Results 1 to 10 of 11
Thread: Best powder for .40 S&W
-
September 8th, 2009, 08:15 PM #1
Best powder for .40 S&W
I was over at my favorite local gun store a few days ago, and talking to the owner about some of my reloading efforts. I mentioned that I was using Titegroup for reloading .40 S&W, but that even with loads close to the maximum, they bullets still sounded and felt slow. His response was that Titegroup burned too fast to get the best velocity out of the round. He mentioned a powder, but of course I neglected to write it down, and now I cannot remember. So if anyone has some experience with this, I would be interested to hear it - or read it, anyway.
Thanks.
-
September 8th, 2009, 08:26 PM #2
Re: Best powder for .40 S&W
I settled on 3.8 grains of bullseye behind a 175 grain swc (I think). Nice comfortable round and shooting very accurately out of my 4.25" barrel M&P40. I tried them as hot as 4.4 grain, but that was brutal.
-
September 8th, 2009, 08:43 PM #3Senior Member
- Join Date
- Oct 2006
- Location
-
Clay County,
Florida
- Posts
- 420
- Rep Power
- 275
Re: Best powder for .40 S&W
Check out this link:
http://data.hodgdon.com/cartridge_load.asp
It covers three brands and all their powders. You can filter it for brand/bullet weight.
-
September 9th, 2009, 07:59 AM #4
Re: Best powder for .40 S&W
I've used Longshot for some loads. IIRC the velocity according to the manual was 1050 - 1100 ft/s at max load. Its got one hell of a kick compared to titegroup or HP-38. Load was somewhere around 7.5 grains so it filled the case pretty well.
-
September 9th, 2009, 09:15 AM #5
Re: Best powder for .40 S&W
Thanks for the input guys. Dave, I appreciate the link, but that is the chart I am using. It will give me data for any powder I care to try, but it doesn't give me recommendations as to which will work the best.
-
September 9th, 2009, 09:31 AM #6
Re: Best powder for .40 S&W
I had good results from using blue dot.
8.9gr of Blue Dot
155gr Magtech JHP
1.125 OAL
CCI primer
shot 1in groups at 7 yards.Peace, Prosperity, and Liberty
-
September 9th, 2009, 08:49 PM #7
Re: Best powder for .40 S&W
Power Pistol or WSF.
The_Vigilante
"A man can never own enough guns."
-
September 9th, 2009, 09:04 PM #8
Re: Best powder for .40 S&W
Personally, I've had the best results for .40 S&W with IMR 800-X, which is substantially slower burning than bullseye. I use 160 gr TMJ bullets and 7.5 gr 800-X. I started using 7.2 gr, but had some unburnt powder, so I moved up to 7.5 gr and had no problems. I shoot them out of my XD 40 subcompact.
What weight bullets are you using?Last edited by max384; September 9th, 2009 at 09:06 PM.
-
September 10th, 2009, 10:15 AM #9Active Member
- Join Date
- Aug 2007
- Location
-
Robinson,
Pennsylvania
(Allegheny County) - Posts
- 176
- Rep Power
- 143040
Re: Best powder for .40 S&W
.180 gr Cast FP
6.0 - 6.5 Unique
WSP primers
I use this most of the time and its been really good out of both my Steyr M40 and CZ-40B. I've tried Bullseye and 231 but I always go back to Unique for my 40's.
-
September 10th, 2009, 11:31 AM #10
Similar Threads
-
Stick Powder Jamming Powder Measure
By L T C in forum GeneralReplies: 9Last Post: July 30th, 2009, 05:49 PM -
Red Dot Powder
By Iron Sights in forum GeneralReplies: 11Last Post: February 10th, 2009, 08:12 AM -
where to buy powder?
By dairdvl in forum GeneralReplies: 8Last Post: January 18th, 2009, 11:44 PM -
WTS/WTT Powder
By sergeantjp in forum GeneralReplies: 0Last Post: August 10th, 2008, 09:28 PM
Bookmarks