Results 1 to 4 of 4
-
August 2nd, 2009, 11:00 PM #1
A shot in the dark, large frame revolvers from the 1980s
I am gonna take a chance here, and hopefully some of the old timers may remeber back in the early eighties, probably somewhere between the 1978 - 1988 era, there were a couple maybe 3 times I remember seeing these huge revolvers written about in Guns & Ammo magazine, but I cant remember anything but seeing the covers in myhead.
What I remember are the calibers, I THINK...!!
.460, .470, .500, but not the modern ones.. these were most likely specialty calibers at the time, wildcat loads, etc.
If I could see the covers I would know it immediately, but after searching the internet for old Guns & Ammo covers all evening, I came up empty.
Do any fo you remember such things, or at the very least have old Guns and Ammo magazins that you could look at to see..?
Thanks,
Dave- Certified Glock Armorer, Μολὼν λαβέ
-
August 2nd, 2009, 11:39 PM #2
Re: A shot in the dark, large frame revolvers from the 1980s
Hmm, I know the .500 Linebaugh is still alive and kickin. There is a backed-down load .460 caliber out there, just cant remember what it is.
Look for info from John Taffin, he has several books out there on old big bores.
-
August 3rd, 2009, 12:58 AM #3
Re: A shot in the dark, large frame revolvers from the 1980s
.454 Casull.
Any mission, any conditions, any foe at any range.
Twice the mayhem, triple the force.
Ten times the action, total hardcore.
-
August 3rd, 2009, 01:34 AM #4
Re: A shot in the dark, large frame revolvers from the 1980s
I remember the .454 Casull.. These were different..
I remember a really large blued pistol with what appeared to be rosewood or cocobolo grips, and the other one was stainless or nickel plated with black grips..
Not much to go on, I know, but its caught my eye back then, because they were not commercially produced..
Thanks for the help anyway guys.. always appreciated..
Dave
- Certified Glock Armorer, Μολὼν λαβέ
Similar Threads
-
899 Large pistol magnum pri. for large rifle primers
By loosenuts in forum GeneralReplies: 1Last Post: May 16th, 2009, 12:34 PM -
Small-frame revolvers chambered in 9mm or .40 S&W
By Eugene V. Debs in forum GeneralReplies: 14Last Post: May 5th, 2009, 10:45 AM -
Springfield XDM 9 or XD45 MUST BE OD Green or Flat Dark Earth frame!
By chrisaka in forum GeneralReplies: 1Last Post: January 17th, 2009, 02:01 AM -
WTB: 7 & 8 shot .357 Mag Revolvers
By dragonofpa in forum GeneralReplies: 0Last Post: January 11th, 2008, 08:04 PM -
Galco shoulder holster component for large frame Glocks..Left handed and like new
By rich e in forum GeneralReplies: 1Last Post: September 26th, 2007, 08:41 PM
Bookmarks