Results 1 to 7 of 7
Thread: 1911 disassembly
-
May 16th, 2007, 09:29 PM #1
1911 disassembly
My roommate just bought a used Springer 1911, and he is having a problem with disassembly. We get as far as taking the slide off the frame, but cannot get the guide rod and spring out. its like the guide rod is too long for the gun, and there isn't clearance with the barrel to remove it. I have no idea if it is a stock rod or not. Anyone have any ideas here? Thanks.
-axmdr40Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth.- George Washington
"I thought Lycan was a she"-dragonofpa
-
May 16th, 2007, 09:40 PM #2Super Member
- Join Date
- Sep 2006
- Location
-
Tannersville,
Pennsylvania
(Monroe County) - Age
- 56
- Posts
- 749
- Rep Power
- 142
Re: 1911 disassembly
What model?
4 or 5" bbl?
Rich W.
-
May 16th, 2007, 09:40 PM #3
Re: 1911 disassembly
It depends if the gun has a bushing barrel or a non bushing barrel.
Either way.....put the slide back on. At the muzzle, press the guidrod plug in and rotate the barrel bushing. Careful the guiderod plug and spring will want to come out. Let them (gently). Pull the bushing out. Take slide off and the guiderod should come out now.
For a non-bushed barrel, leave the slide on and lock the slide back. Look for a hole in the guiderod. Bend a paperclip in an "L" so you can slide the clip along the rod and put the small end of the "L" in that hole. Slowly lower the slide on the clip. Take slide off and the guiderod and clip should come out as a unit.
Lycanstandingbythrope
I taught Chuck Norris to bump-fire.
-
May 16th, 2007, 09:42 PM #4
Re: 1911 disassembly
P.S. I'm in chat.
I taught Chuck Norris to bump-fire.
-
May 16th, 2007, 10:07 PM #5
Re: 1911 disassembly
Mission accomplished.
Lycanhighfivesthrope
I taught Chuck Norris to bump-fire.
-
May 17th, 2007, 05:23 PM #6
Re: 1911 disassembly
Lycan, and everyone else, thanks for the help! We had quite an ordeal getting the spring and guiderod plug back on for assembly, do they make a special tool to aid in this? BTW, I think we're going to the range tomorrow...I'm excited.
axmdr40Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth.- George Washington
"I thought Lycan was a she"-dragonofpa
-
May 17th, 2007, 10:24 PM #7
Re: 1911 disassembly
Yes, it's called a bushing wrench.
http://www.brownells.com/
Assemble put the barrel, barrel bushing and guiderod back into the slide and reinstall the slide on the frame. From the front, slip the spring over the guiderod. Put the guiderod plug on the spring and compress it until you can just turn the barrel bushing to hold it in place. Then take something flat and compress it the rest of the way until the bushing rotates the whole way in place.
And...go here:
http://forums.1911forum.com/
I taught Chuck Norris to bump-fire.
Similar Threads
-
What makes a 1911 a 1911?
By LittleRedToyota in forum GeneralReplies: 27Last Post: December 15th, 2008, 10:17 PM -
Why a 1911??
By Mtbkski in forum GeneralReplies: 110Last Post: May 27th, 2007, 11:54 PM -
WTB: 1911
By sig-9 in forum GeneralReplies: 1Last Post: March 28th, 2007, 09:34 AM -
anyone want to help with my 1911
By Justin in forum GeneralReplies: 3Last Post: January 16th, 2007, 01:07 PM -
Can you tell me about my 1911?
By mjd932 in forum GeneralReplies: 10Last Post: January 4th, 2007, 08:53 PM
Bookmarks