Pennsylvania Firearm Owners Association
Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Hybrid View

  1. #1
    Join Date
    Aug 2008
    Location
    montoursville, Pennsylvania
    (Lycoming County)
    Age
    44
    Posts
    423
    Rep Power
    792

    Default ar wont chamber a round?

    hey all,
    a friend of mine just bought an a2 20" ar. he brought it over to do some shooting, and it will not chamber a round. it will the bcg will not fully close, now you can force it shut but then it will not open. i have a usgi dummie round, it will cycle that through without a problem. so we mic'd the dummie against the live round and the only differance was the dummie has no primer.then we lokked at all the live rounds that we tried and even thought the bcg was not closing they all had a tiny mark on the primers. i have 3 used bcg's so we tried them all and still same results. now we have taken it to a local guy who build ar's everyday and he says just to get a ream and ream out the end of the barrel so the round will set further down it the chamber. just by crudely measuring it he says that the round is sticking out about 3/32's further than it should. any ideas
    ...

  2. #2
    Join Date
    Oct 2006
    Location
    New Castle, Pennsylvania
    (Lawrence County)
    Posts
    8,392
    Rep Power
    4021338

    Default Re: ar wont chamber a round?

    AR's have floating firing pins, they ding the primers when you chamber them.

    Don't mix and match used bolt carrier groups without checking headspace. That can get you into trouble.

    Have you given it a good chamber scrubbing with a brush?

    Using reloads?

    Lycanweneedmoreinfothrope

    I taught Chuck Norris to bump-fire.

  3. #3
    Join Date
    Aug 2008
    Location
    montoursville, Pennsylvania
    (Lycoming County)
    Age
    44
    Posts
    423
    Rep Power
    792

    Default Re: ar wont chamber a round?

    all rounds are new, federal .223 i'm not sure about scrubbing the barrel? please describe this to me. oh and he tells me this is a new never fired upper from colt.
    ...

  4. #4
    Join Date
    Oct 2006
    Location
    New Castle, Pennsylvania
    (Lawrence County)
    Posts
    8,392
    Rep Power
    4021338

    Default Re: ar wont chamber a round?

    Well, I wasn't sure if the gun was new or used......and AR's can get a dirty chamber with some ammunition.

    So.....there are special chamber brushes, but you can usually use a regular .22 caliber brush and some solvent. Clean it out really well.

    Lycanmakesureshe'scleanthrope

    I taught Chuck Norris to bump-fire.

  5. #5
    Join Date
    Aug 2008
    Location
    montoursville, Pennsylvania
    (Lycoming County)
    Age
    44
    Posts
    423
    Rep Power
    792

    Default Re: ar wont chamber a round?

    well the really weird part is that it will cycle the dummy but not a live round. and the only differance is the dummy is hollow where the primer should be
    ...

  6. #6
    Join Date
    Mar 2008
    Location
    Weatherly, Pennsylvania
    (Carbon County)
    Age
    49
    Posts
    556
    Rep Power
    1540

    Default Re: ar wont chamber a round?

    Quote Originally Posted by o1dakota440 View Post
    all rounds are new, federal .223 i'm not sure about scrubbing the barrel? please describe this to me. oh and he tells me this is a new never fired upper from colt.
    Hey PA, right there. Ya missed it.

  7. #7
    Join Date
    Mar 2006
    Location
    Mountain Top, Pennsylvania
    (Luzerne County)
    Age
    53
    Posts
    11,944
    Rep Power
    632700

    Default Re: ar wont chamber a round?

    Quote Originally Posted by xd40_jim View Post
    Hey PA, right there. Ya missed it.
    Heh - there it is But if I didn't see it it didn't happen

    So, reminder to all: As with any firearm. Always clean it before firing. Lots of residue and even metal can be present. Not to mention removing the gobs of protective grease/oil
    _________________________________________

    danbus wrote: ...Like I said before, I open carry because you don't, I fight for all my rights because
    you won't, I will not sit with my thumb up my bum and complain, because you will.
    Remember Meleanie

  8. #8
    Join Date
    May 2006
    Location
    Lubbock, Texas
    Age
    40
    Posts
    2,893
    Rep Power
    1283728

    Default Re: ar wont chamber a round?

    Quote Originally Posted by xd40_jim View Post
    Hey PA, right there. Ya missed it.
    Quote Originally Posted by Pa. Patriot View Post
    Heh - there it is But if I didn't see it it didn't happen

    So, reminder to all: As with any firearm. Always clean it before firing. Lots of residue and even metal can be present. Not to mention removing the gobs of protective grease/oil
    haha, XD40 got you for me. Don't be hatin' on my reading skillz, lol. I'm just giving you hell, I knew I had read it somewhere.

  9. #9
    Join Date
    Mar 2006
    Location
    Mountain Top, Pennsylvania
    (Luzerne County)
    Age
    53
    Posts
    11,944
    Rep Power
    632700

    Default Re: ar wont chamber a round?

    Quote Originally Posted by o1dakota440 View Post
    now we have taken it to a local guy who build ar's everyday and he says just to get a ream and ream out the end of the barrel so the round will set further down it the chamber. just by crudely measuring it he says that the round is sticking out about 3/32's further than it should. any ideas
    "Crudely measured"? The gun is either properly headspaced or it is not. Easily checked *exactly* with the right tools.
    The chamber is either cut to the proper dimensions or it is not. Easily checked *exactly* with the right tools.
    If the chamber needs reamed that will only happen if the chamber is not chrome lined.

    Was this rifle new?

    If the rifle will not chamber after a thorough cleaning of the chamber and BCG I would suggest taking the rifle to someone who knows what they are doing ..... or returning it.
    _________________________________________

    danbus wrote: ...Like I said before, I open carry because you don't, I fight for all my rights because
    you won't, I will not sit with my thumb up my bum and complain, because you will.
    Remember Meleanie

  10. #10
    Join Date
    Aug 2008
    Location
    montoursville, Pennsylvania
    (Lycoming County)
    Age
    44
    Posts
    423
    Rep Power
    792

    Default Re: ar wont chamber a round?

    ok so i told him to clean it good, and now it seams to be chambering correctly. he is gonna try to get out to my place tomarrow and run a few rounds through it. i'll let you know how it works.
    ...

Page 1 of 2 12 LastLast

Similar Threads

  1. Sks wont load round
    By nnmnu1 in forum General
    Replies: 6
    Last Post: May 7th, 2009, 04:56 PM
  2. Replies: 16
    Last Post: April 23rd, 2009, 12:09 AM
  3. Replies: 7
    Last Post: December 22nd, 2008, 12:41 AM
  4. Round Stuck In Chamber
    By Ryegye in forum General
    Replies: 18
    Last Post: May 31st, 2008, 09:11 AM
  5. This wont help us
    By Frenchy in forum General
    Replies: 2
    Last Post: April 3rd, 2007, 08:23 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •