Results 1 to 5 of 5
Thread: Anyone have an idea on.....
-
March 8th, 2009, 09:46 PM #1
Anyone have an idea on.....
How much it might cost to turn a bolt handle down to .313 and thread it?
Or of any quality gunsmiths in the Lebanon (south) area?
Thanks
-
March 9th, 2009, 04:15 PM #2
Re: Anyone have an idea on.....
.313 is not a standard size. Do you mean .3125 (5/16)? How'd you arrive at that spec? What thread does it need? 16TPI? 18? Something else?
It's an easy job, depending, for anyone with a lathe. You don't (necessarily) need a gunsmith.Kevin Singleton, Potawatomi - {ZRT - Sector 4}
-
March 9th, 2009, 04:39 PM #3
Re: Anyone have an idea on.....
I want to install a Badger ordinance tactical bolt knob, the specs from the website say that the original bolt needs to be turned to .313 and threaded to 5/16 24tpi..
-
March 9th, 2009, 05:40 PM #4Super Member
- Join Date
- Apr 2007
- Location
-
Reading,
Pennsylvania
(Berks County) - Age
- 49
- Posts
- 934
- Rep Power
- 105
Re: Anyone have an idea on.....
I have a Badger knob on my 700. I sent the bolt directly to Badger to have it done. Only took a few weeks and it was done by the people that KNOW how to do it properly. Plus I know if there was ever a problem I would have someone to go back to. You might want to look into that. I think it only cost around $60 to have it done.
-
March 9th, 2009, 06:18 PM #5
Re: Anyone have an idea on.....
<plug>
You mean..... Like this?
http://frontlinearmory.com/gunsmithing/bolt_knob.html
</plug>_________________________________________
danbus wrote: ...Like I said before, I open carry because you don't, I fight for all my rights because
you won't, I will not sit with my thumb up my bum and complain, because you will.
Similar Threads
-
I just had an idea!
By fingers80002 in forum GeneralReplies: 17Last Post: October 17th, 2008, 01:04 PM -
Anyone have an idea what this was?
By Azzy in forum GeneralReplies: 8Last Post: October 11th, 2007, 11:26 PM -
here's an idea......
By Punisher in forum GeneralReplies: 31Last Post: August 30th, 2007, 11:52 AM -
Got an idea!
By Chunky Monkey in forum GeneralReplies: 12Last Post: July 12th, 2007, 05:28 PM -
Not too bad of an idea if you ask me
By SGTUSArmy in forum GeneralReplies: 11Last Post: December 20th, 2006, 08:43 AM
Bookmarks