Results 1 to 10 of 11
-
February 7th, 2023, 05:30 PM #1Junior Member
- Join Date
- Jan 2021
- Location
-
Bethlehem,
Pennsylvania
(Northampton County) - Posts
- 3
- Rep Power
- 0
Birch Stock Refinishing with Pure Tung Oil
I recently purchased a Ruger Mini-14 5816 with the hardwood stock. Love the rifle...but I prefer all of my firearms to have a Tung Oil finish. Decided that I wanted to refinish the stock and, after contacting the company and doing some research, I found out that the stock was birch.
This led me to research what others have done previously that led me to the conclusion that birch is incredibly difficult to stain and darken. As I'm sure most of you know it ends up blotching most of the time. Because I use Real Milk Paint Tung Oil products, I was intrigued by the Dark Tung Oil that they offer. Also found this post helpful where someone applied this product to a birch stock but it came out blotchy. I decided to apply it full strength instead of thinning it with the hope that it would not be as blotchy.
To make a long story short I wanted to post my process here in case anyone was interested in stripping the original finish and applying a similar finish:
- Applied CitriStrip liberally across the entire stock.
- Let sit for 24 hours and scrape off with a hard plastic edge.
- Applied CitriStrip again to lift out remaining stain for similar time and scraped off excess.
- Used a rag between stock and iron and steamed the remaining stain to the surface and wiped off.
- At this point all of the stain was lifted and I sanded with the grain lightly with 180 grit, wet with water and allowed to dry, sanded with 220 grit, wet with water and allowed to dry, sanded with 320 grit. It should be noted that I barely sanded the connection points where the metal touches the wood.
- Wiped off all of the sawdust and poured full-strength Real Milk Paint Dark Tung Oil into a cup. Wiped on to stock with a rag and kept just enough oil on the stock to keep it wet. For 40 minutes I constantly applied a little more oil to the entire stock to keep it wet as it soaked in.
- Then...wipe off excess.
- I applied many more coats until the stock stopped absorbing the tung oil.
I should have taken photos of the entire process but I have a flip phone. Wish it were darker but I'm pretty happy with the result. Could probably get it darker by thinning out the tung oil but I don't want to risk making it more blotchy.
thumbnail_IMG_4429.jpg
thumbnail_IMG_4430.jpg
thumbnail_IMG_4431.jpg
thumbnail_IMG_4432.jpg
thumbnail_IMG_4434.jpgLast edited by Yosef; February 13th, 2023 at 09:26 AM. Reason: Title Change
-
February 8th, 2023, 10:17 AM #2
Re: Birch Stock Refinishing with Pure Tung Oil
Looks nice!
-
February 9th, 2023, 06:33 PM #3
Re: Birch Stock Refinishing with Pure Tung Oil
very nice
Owner Trigger Time LLc 01 FFL/NFA Saylorsburg, PA. Sales/Service/Transfers/Training
NRA CRSO/Pistol/Rifle/Shotgun inst. BSA Rifle/Shotgun Merit badge counselor. US Navy Marksmanship Team Staff
-
February 9th, 2023, 07:15 PM #4
Re: Birch Stock Refinishing with Pure Tung Oil
I like it very much; you did a great job and IMO it was well worth the effort.
NoahWisdom and knowledge shall be the stability of thy times.
-
February 10th, 2023, 01:48 AM #5
Re: Birch Stock Refinishing with Pure Tung Oil
Perfect.
Thanks for sharing!I called to check my ZIP CODE!....DY-NO-MITE!!!
-
February 10th, 2023, 09:47 AM #6
Re: Birch Stock Refinishing with Pure Tung Oil
Fantastic, nice work!
Resistance to tyrants is obedience to God.
-
February 10th, 2023, 10:43 AM #7
Re: Birch Stock Refinishing with Pure Tung Oil
The Real Milk Paint guy used to be about three miles away from me on Pumping Station Rd in Qtown. He's a good dude. I think he's somewhere in NC now.
I've used many of his products and they were al top notch. I redid an NOS unfinished '03 C stock with his tung oil. I did four coats and it came out great. Unfortunately, my asshole dog ate the upper handguard.Accuse your enemy of what you are doing as you are doing it to create confusion -Karl Marx
-
February 10th, 2023, 10:49 AM #8
Re: Birch Stock Refinishing with Pure Tung Oil
It looks awesome, nice job but I have one question...Why didn't you just remove the everything from the stock so you didn't have to tape it up and work around it?
Gender confusion is a mental illness
-
February 10th, 2023, 01:05 PM #9
Re: Birch Stock Refinishing with Pure Tung Oil
Originally Posted by Walleye Hunter;Accuse your enemy of what you are doing as you are doing it to create confusion -Karl Marx
-
February 13th, 2023, 09:23 AM #10Junior Member
- Join Date
- Jan 2021
- Location
-
Bethlehem,
Pennsylvania
(Northampton County) - Posts
- 3
- Rep Power
- 0
Similar Threads
-
Problem with refinishing a birch stock
By mikepro8 in forum GunsmithingReplies: 5Last Post: May 19th, 2010, 02:30 AM
Bookmarks