Pennsylvania Firearm Owners Association
Page 1 of 4 1234 LastLast
Results 1 to 10 of 35
  1. #1
    Join Date
    Feb 2008
    Location
    State College, Pennsylvania
    (Centre County)
    Age
    36
    Posts
    283
    Rep Power
    48

    Default Driving with High Beams at night on the highway

    Are there any laws against driving with your high beams on when traveling on a large divided highways?
    Machinist for hire - Get a hold of me if you need something made

  2. #2
    Join Date
    Apr 2008
    Location
    Pocono`s, Pennsylvania
    (Monroe County)
    Posts
    3,641
    Rep Power
    21474855

    Default Re: Driving with High Beams at night on the highway

    I think they must be dimmed when there is oncoming traffic and in urban areas and that`s the law.

  3. #3
    Join Date
    May 2006
    Location
    Diegolandia, Pennsylvania
    (Philadelphia County)
    Posts
    2,457
    Rep Power
    2894079

    Default Re: Driving with High Beams at night on the highway

    Quote Originally Posted by unclemoak View Post
    Are there any laws against driving with your high beams on when traveling on a large divided highways?
    Yes.

    Common Man-Law against being a douche-bag.

    Why do you need high-beans on the highway??
    ==============
    “If ye love wealth better than liberty, the tranquillity of servitude than the animating contest of freedom, — go from us in peace. We ask not your counsels or arms. Crouch down and lick the hands which feed you. May your chains sit lightly upon you, and may posterity forget that ye were our countrymen!”
    ~Samuel Adams

    "I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it."
    ~Thomas Jefferson, 1791

  4. #4
    Join Date
    Mar 2007
    Location
    City in, Pennsylvania
    Posts
    7,258
    Rep Power
    3606358

    Default Re: Driving with High Beams at night on the highway

    From the PA Driver's Manual:

    • Use your “low beam” setting during heavy fog, snow or heavy rain. Light from your “high beam” setting will reflect and cause glare. Use low beams as soon as you see another vehicle approaching in the oncoming lane as high beams can “blind” the other driver.

    Pennsylvania law requires that you use low beams whenever you are within 500 feet of an oncoming vehicle and when you are following a vehicle within 300 feet.

    If a vehicle using high beams comes toward you, flash your lights quickly a few times. If the driver does not dim the lights, look toward the right side of the road. This will keep you from being “blinded” by the other vehicle’s headlights and will allow you to see enough of the road’s edge to stay on your course until the vehicle passes.

    Do not try to punish the other driver by keeping your bright lights on. If you do, both of you may be “blinded.” It is better if at least one of you can see well.

    It is very important that you dim your high beams for oncoming bicyclists and pedestrians (especially runners). These road users may be blinded by high beams, and you expose them to grave danger if you don’t dim your high beams.

  5. #5
    Join Date
    Jan 2008
    Location
    Reading, Pennsylvania
    (Berks County)
    Age
    40
    Posts
    2,394
    Rep Power
    215119

    Default Re: Driving with High Beams at night on the highway

    Quote Originally Posted by LorDiego01 View Post
    Yes.

    Common Man-Law against being a douche-bag.

    Why do you need high-beans on the highway??
    QFT.

    10 Characters

  6. #6
    Join Date
    Mar 2007
    Location
    Allentown, Pennsylvania
    (Lehigh County)
    Age
    39
    Posts
    2,213
    Rep Power
    21474856

    Default Re: Driving with High Beams at night on the highway

    Rule of thumb is if you can see another person's headlights, they can see yours, and you should be using your low beams. So if the highway's opposing lanes are divided by an obstruction tall enough that you can't see headlights of oncoming cars, then you should be fine using your high beams as long as there's nobody in front of you that you can see. Otherwise stick to your low beams.
    Any mission, any conditions, any foe at any range.
    Twice the mayhem, triple the force.
    Ten times the action, total hardcore.

  7. #7
    Join Date
    Oct 2006
    Location
    Picture Rocks, Pennsylvania
    (Lycoming County)
    Posts
    117
    Rep Power
    20

    Default Re: Driving with High Beams at night on the highway

    Quote Originally Posted by LorDiego01 View Post
    Yes.

    Common Man-Law against being a douche-bag.

    Why do you need high-beans on the highway??
    One obviously common reason would be that the greater rate of travel requires a longer visual range to maintain adequate reaction times. In other words if you're going faster the high beams make it easier to see farther when that 12 point jumps out into the road.

    What highways do you drive that already have adequate lighting??

    Oh, just checked, you're in Philadelphia; most of the rest of the state doesn't have lighted highways. We don't like bright lights everywhere because then you can't see the stars.
    I think the founding fathers meant exactly what they wrote: the government should not make any laws restricting the RIGHT of the people to 'hold or retain in one's possession' and 'hold or carry' guns and other weapons that would allow them to keep their government in line.

  8. #8
    Join Date
    Mar 2007
    Location
    Chester Springs, Pennsylvania
    (Chester County)
    Posts
    2,249
    Rep Power
    21474856

    Default Re: Driving with High Beams at night on the highway

    Quote Originally Posted by General Geoff View Post
    Rule of thumb is if you can see another person's headlights, they can see yours, and you should be using your low beams. So if the highway's opposing lanes are divided by an obstruction tall enough that you can't see headlights of oncoming cars, then you should be fine using your high beams as long as there's nobody in front of you that you can see. Otherwise stick to your low beams.
    Exception to rule of thumb: A semi driver sits well above his lights, so if you can see a trucks clearance lights, but his head lights are not visible above the jersey barriers, you should dim your high beams. Although you may not see his lights, he may still be blinded by yours.

  9. #9
    Join Date
    Aug 2008
    Location
    Near Nazareth, Pennsylvania
    (Northampton County)
    Posts
    332
    Rep Power
    150750

    Default Re: Driving with High Beams at night on the highway

    Quote Originally Posted by LorDiego01 View Post
    Yes.

    Common Man-Law against being a douche-bag.
    QFMFT!!!!!

  10. #10
    Join Date
    Apr 2007
    Location
    Franklin, Pennsylvania
    (Venango County)
    Posts
    3,920
    Rep Power
    15878968

    Default Re: Driving with High Beams at night on the highway

    I thought that (at least when I was learning to drive) a divided highway was the only exception to not requiring low beams when oncoming traffic approached.

    I dim mine anyway because today's headlamps are so much brighter. Same with the 300 ft rule to the rear. I dim if I can see your taillights at all.
    It is you. You have all the weapons that you need. Now fight. --Sucker Punch

Page 1 of 4 1234 LastLast

Similar Threads

  1. WTS: S&W M28 - Highway Patrolman - 4"
    By Captainkgun in forum General
    Replies: 7
    Last Post: July 25th, 2022, 12:20 PM
  2. Replies: 1
    Last Post: May 22nd, 2008, 06:41 AM
  3. PAFOA adopt a highway?
    By P-11 shooter in forum General
    Replies: 6
    Last Post: May 12th, 2008, 08:44 AM
  4. Replies: 1
    Last Post: April 24th, 2008, 08:50 PM
  5. Replies: 3
    Last Post: February 24th, 2008, 12:39 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •