Results 11 to 12 of 12
-
April 3rd, 2020, 11:42 AM #11
Re: How To Fix Stuff or Problem Solved
Here's one that I just did. The end stop bracket for the Z-Axis on my printer broke throwing off the height of the head over the bed. I can't print a new one because I don't have an accurate Z-Axis. I happened to have a bunch of these collars on hand and one fit. It's not a perfect fit, but it's close enough.
Rules are written in the stone,
Break the rules and you get no bones,
all you get is ridicule, laughter,
and a trip to the house of pain.
-
April 3rd, 2020, 11:48 AM #12
Re: How To Fix Stuff or Problem Solved
Q-Jets rule!
If it's bogging, it ain't set up right.
Or too big. (Too many CFM)
Put my buddy's Buick Stage 1 Q-Jet on my '67 442 for shits and giggles. I think it was rated at 830 CFM.
It bogged terribly off the line but when I kicked it at a roll, it practically pulled the front wheels off the ground, after playing with the springs and weights in the distributor.
Similar Threads
-
Mauser M48 Scope Problem -- SOLVED
By devitor in forum RiflesReplies: 0Last Post: January 23rd, 2010, 12:42 PM -
A SmartCarry problem solved
By LastManOut in forum GeneralReplies: 0Last Post: April 29th, 2008, 08:27 AM
Bookmarks