Results 1 to 10 of 12
-
February 10th, 2020, 05:23 PM #1
Looking for gunsmith in Central PA
So I had a mishap, more then one actually changing out a front sight on a Ruger Alaskan. The cross pin buckled causing the punch to break off in the hole. I got the crosspin out, but the portion of the punch is still jambed in the hole, something is blocking it as it wont move either direction. I tried to drill it out but that was even worse. Pretty sure I will need someone with a Jig to hold the gun and a drill press to make a bigger hole to solve this problem....or just someone who knows guns better then me before I destroy the gun. Anyone know someone with this level of experience in central pa ?
-
February 10th, 2020, 07:14 PM #2
Re: Looking for gunsmith in Central PA
https://m.facebook.com/pg/Rons-Gun-R...9753745/about/
Ron's Gun Repair:
307 Matilda Ave, Lemont, Pennsylvania 16851
(814) 867-0867
He goes by Xringshooter on this forum as well. Good guy and is really into Rugers, so probably knows what needs done.
-
February 10th, 2020, 11:49 PM #3Super Member
- Join Date
- Feb 2015
- Location
-
814,
Pennsylvania
- Posts
- 918
- Rep Power
- 9430368
Re: Looking for gunsmith in Central PA
I would think you could do this yourself but maybe not.
I kind of want to pound it out myself.
Lube her before you do though , that can make a difference.
Given your location , you know we have very little in good smiths.
Given your location I would check with Dugans gun shop …. call him first and check.
He is in Port Matilda.
Google him , not hard to find …. go to bald Eagle intersection over there around Tyrone, hook a right onto Mountain Rd and follow that , watch for deer crossing , he'll be in a block building up on your left.
-
February 11th, 2020, 12:13 AM #4Super Member
- Join Date
- Feb 2015
- Location
-
814,
Pennsylvania
- Posts
- 918
- Rep Power
- 9430368
Re: Looking for gunsmith in Central PA
Hey one more thing ... I do not know if you have a plastic insert on the sight you are trying to save
But if not , have you considered using heat.
Heat makes things "the hole" expand.
When I say heat , I am not talking about cherry red.
I've used smartly applied heat before and it goes a long ways without boogering anything.
A little can go a long ways ..... don't stand there for long.
maybe even a soldering iron could do it .... maybe , of course that takes longer than the torch.
heat the opposite end of where the punch is stuck of course so to not heat punch as much
just a thought
-
February 11th, 2020, 01:38 PM #5
Re: Looking for gunsmith in Central PA
OOPS.jpg
With that bulge Im not sure which way to tap it to not damage it any further. Im thinking once the pin went thru the sight, the sight shifted a little, then the punch was up against the sight and the tip bent or something inside the hole. I honestly cant tell how this happened, and am very surprised the metal bulged and how soft it is for such a beefy gun.
-
February 11th, 2020, 01:46 PM #6
Re: Looking for gunsmith in Central PA
If you decide you need some assistance let me know and I can take care of it for you. Just give me a call to set it up. As said I do specialize in repair and restoration of the Ruger DA revolvers, old and new.
Ron USAF Ret E-8 FFL01/SOT3 NRA Benefactor Member
-
February 11th, 2020, 05:05 PM #7Super Member
- Join Date
- Feb 2015
- Location
-
814,
Pennsylvania
- Posts
- 918
- Rep Power
- 9430368
Re: Looking for gunsmith in Central PA
It's mild steel so it'll deform but my eyes seem to be seeing a huge booger bulge alright.
Not 100% sure how you got it like what I think I am seeing but...
You should stop any further work and take that to someone.
The poster above me says he can fix it …. so there you go.
State College isn't that far.
-
February 11th, 2020, 06:32 PM #8
Re: Looking for gunsmith in Central PA
I messaged you on FB as well. Shorthanded at work for the next few weeks but will definitely call.
-
February 11th, 2020, 06:35 PM #9
Re: Looking for gunsmith in Central PA
I'm not sure either, this should have gone smooth. I've never damaged anything before in my life. It was a little dark and late at night but I wasnt hitting it that hard.....or so I thought.
-
February 17th, 2020, 05:17 PM #10Super Member
- Join Date
- Feb 2015
- Location
-
814,
Pennsylvania
- Posts
- 918
- Rep Power
- 9430368
Re: Looking for gunsmith in Central PA
Any updates ?
Fixed yet?
If not , I'll give you a hundred for it since it's ruined
Similar Threads
-
Need a Central PA gunsmith...
By calypsocoral in forum GunsmithsReplies: 6Last Post: February 24th, 2015, 01:24 AM -
Central Pa gunsmith
By mpierich in forum GunsmithsReplies: 2Last Post: March 3rd, 2011, 06:31 PM -
Looking for gunsmith in south central - central PA.
By Pector55 in forum GeneralReplies: 4Last Post: September 3rd, 2009, 11:36 PM -
Looking for a Gunsmith (Central PA)
By Nerfsrule2 in forum GeneralReplies: 8Last Post: November 30th, 2008, 05:50 PM -
looking for gunsmith in Central Pa
By spike675 in forum GeneralReplies: 4Last Post: February 7th, 2008, 10:19 AM
Bookmarks