Results 111 to 120 of 296
Thread: SEPA Milling Party?
-
January 29th, 2020, 10:12 AM #111
-
January 29th, 2020, 10:16 AM #112Active Member
- Join Date
- Jan 2013
- Location
-
Chester Springs,
Pennsylvania
(Chester County) - Posts
- 182
- Rep Power
- 15567429
Re: SEPA Milling Party?
Late to the thread, but another local in. And can bring another Kerosene heater to add to the mix.
Razor Sharp grinding is our tooling supplier and 15min from WH's area. If we need tooling, let me know sizes and I can get it ordered asap to have spares on hand.
I am game to chip in on the fixture as well, someone just needs to tell me who to settle up with.
-
January 29th, 2020, 10:20 AM #113
Re: SEPA Milling Party?
Gender confusion is a mental illness
-
January 29th, 2020, 10:34 AM #114Active Member
- Join Date
- Jan 2013
- Location
-
Chester Springs,
Pennsylvania
(Chester County) - Posts
- 182
- Rep Power
- 15567429
Re: SEPA Milling Party?
Not sure if they will sell to a walk in, but def stock a load of endmills. I will just add anything we need to our next PO from work and get it, not a problem. Usually enjoy lunch at the Coventry Cafe a couple times a week, so easy enough stop in and grab anything we may need.
One of the others in the thread said he bought the the Easy Jig Gen 2, which uses hand held routers. Their replacement tooling is $50. (We also have a ton of hand routers at the shop, can borrow a couple for the day if needed so we arent getting anything too hot)
https://www.80percentarms.com/produc...en-2-tool-kit/
I am happy to order a set for the Easy Jig if we are going to use that jig, or if we are using a drill press jig I can grab some endmills from Razor Sharp.
-
January 29th, 2020, 10:35 AM #115Member
- Join Date
- Aug 2018
- Location
-
Its Cold outside
- Posts
- 77
- Rep Power
- 3876878
Re: SEPA Milling Party?
I will recommend getting a few end mills.
If you pull out the router before it stops spinning you can shatter it ending your fun if you only have one.
They also have a tendency to to move in the router no matter how tight you get them.
Check the depth of your cut often as it will start to cut deeper during the process.
I have no affiliation with this company but they have solved the moving issue with this end mill for a router.
https://www.modulusarms.com/router-j...eme-speedmill/
-
January 29th, 2020, 11:00 AM #116
Re: SEPA Milling Party?
It couldn't hurt to have an extra or two on hand. The ones that I have in our size range (3/8", 5/16") are double headers about 3" long so holding them and having 2" protrude is going to be close. The best I can tell and from watching the video either of those two sizes should do what we need to do.
Gender confusion is a mental illness
-
January 29th, 2020, 12:10 PM #117Active Member
- Join Date
- Jan 2013
- Location
-
Chester Springs,
Pennsylvania
(Chester County) - Posts
- 182
- Rep Power
- 15567429
-
January 30th, 2020, 02:45 AM #118Active Member
- Join Date
- Jul 2011
- Location
-
Warminster,
Pennsylvania
(Bucks County) - Posts
- 135
- Rep Power
- 9274
Re: SEPA Milling Party?
Let me know when and where I have one to do
-
January 30th, 2020, 10:20 AM #119
Re: SEPA Milling Party?
Tentative initial attempt is set for tomorrow, Friday the 31st, time unknown at the moment.
Gender confusion is a mental illness
-
January 30th, 2020, 10:49 AM #120
Re: SEPA Milling Party?
What, this is tomorrow? If so, I won't be able to make it.
I thought we were planning out into the future a little...and on a weekend.Galations 6:9...And let us not grow weary of doing good, for in due season we will reap, if we do not give up.
Ashli Babbitt - Patriot
Similar Threads
-
Anyone want to have a milling party for their 80% receivers..
By edstephan in forum RiflesReplies: 24Last Post: January 26th, 2020, 04:03 PM -
AR milling jig
By jbraun948 in forum GunsmithingReplies: 0Last Post: March 10th, 2014, 03:32 AM -
Custom milling on my M&P Pro
By garyaug in forum PistolsReplies: 11Last Post: August 28th, 2013, 09:42 PM -
Hk USC/ump milling
By BIRTHMACHINE in forum GeneralReplies: 3Last Post: December 10th, 2009, 09:18 AM
Bookmarks